Z68 + 2600K Linux Build Log

One_Box, You rock!



Cheers Dude.

J.

 

My pleasure

 

Quick question guys, I'm submitting a Big Adv unit about every 1.5 days and so far I've only had the P6900's. Now these units are netting me about 62k in points, so that's what.. 32k PPD. To be honest I was expecting more points.. I know about the reduced Big Adv scoring but are these figures the same as yours (2600k @ 4.5ghz)?

J.

 

Joe, I'm getting about 70K on a P6900 (that's from Stanford) @ 4.5GHz.

From the log file, what speed is your WU uploading at? (-verbosity 9 set I hope )

 

Ah, well... erm...

Take a look.

Code:

[05:32:28] Folding@Home Gromacs SMP Core
[05:32:28] Version 2.27 (Thu Feb 10 09:46:40 PST 2011)
[05:32:28] 
[05:32:28] Preparing to commence simulation
[05:32:28] - Looking at optimizations...
[05:32:28] - Created dyn
[05:32:28] - Files status OK
[05:32:30] - Expanded 24862046 -> 30796292 (decompressed 123.8 percent)
[05:32:30] Called DecompressByteArray: compressed_data_size=24862046 data_size=30796292, decompressed_data_size=30796292 diff=0
[05:32:30] - Digital signature verified
[05:32:30] 
[05:32:30] Project: 6900 (Run 47, Clone 9, Gen 18)
[05:32:30] 
[05:32:30] Assembly optimizations on if available.
[05:32:30] Entering M.D.
[05:32:36] Mapping NT from 8 to 8 
[05:32:40] Completed 0 out of 250000 steps  (0%)
[06:01:09] Completed 2500 out of 250000 steps  (1%)
[06:29:39] Completed 5000 out of 250000 steps  (2%)
[06:58:13] Completed 7500 out of 250000 steps  (3%)
[07:26:43] Completed 10000 out of 250000 steps  (4%)
[07:45:36] Project: 6900 (Run 37, Clone 6, Gen 23)


[07:45:36] + Attempting to send results [July 26 07:45:36 UTC]
[07:48:25] + Results successfully sent
[07:48:25] Thank you for your contribution to Folding@Home.
[07:48:25] + Number of Units Completed: 3

[07:55:12] Completed 12500 out of 250000 steps  (5%)
[08:23:42] Completed 15000 out of 250000 steps  (6%)
[08:52:12] Completed 17500 out of 250000 steps  (7%)
[09:20:40] Completed 20000 out of 250000 steps  (8%)
[09:49:11] Completed 22500 out of 250000 steps  (9%)
[10:17:41] Completed 25000 out of 250000 steps  (10%)
[10:46:12] Completed 27500 out of 250000 steps  (11%)
[11:14:43] Completed 30000 out of 250000 steps  (12%)
[11:43:12] Completed 32500 out of 250000 steps  (13%)
[12:11:42] Completed 35000 out of 250000 steps  (14%)
[12:40:11] Completed 37500 out of 250000 steps  (15%)
[13:08:40] Completed 40000 out of 250000 steps  (16%)
[13:37:11] Completed 42500 out of 250000 steps  (17%)
[14:05:40] Completed 45000 out of 250000 steps  (18%)
[14:34:10] Completed 47500 out of 250000 steps  (19%)
[15:02:39] Completed 50000 out of 250000 steps  (20%)
[15:31:09] Completed 52500 out of 250000 steps  (21%)
[15:59:41] Completed 55000 out of 250000 steps  (22%)
[16:28:12] Completed 57500 out of 250000 steps  (23%)
[16:56:45] Completed 60000 out of 250000 steps  (24%)
[17:25:10] Completed 62500 out of 250000 steps  (25%)
[17:53:40] Completed 65000 out of 250000 steps  (26%)
[18:22:07] Completed 67500 out of 250000 steps  (27%)
[18:50:35] Completed 70000 out of 250000 steps  (28%)
[19:19:05] Completed 72500 out of 250000 steps  (29%)
[19:47:32] Completed 75000 out of 250000 steps  (30%)
[20:16:03] Completed 77500 out of 250000 steps  (31%)
[20:44:34] Completed 80000 out of 250000 steps  (32%)
[21:13:02] Completed 82500 out of 250000 steps  (33%)
[21:41:30] Completed 85000 out of 250000 steps  (34%)
[22:10:00] Completed 87500 out of 250000 steps  (35%)
[22:38:30] Completed 90000 out of 250000 steps  (36%)
[23:07:00] Completed 92500 out of 250000 steps  (37%)
[23:35:30] Completed 95000 out of 250000 steps  (38%)
[00:04:00] Completed 97500 out of 250000 steps  (39%)
[00:32:28] Completed 100000 out of 250000 steps  (40%)
[01:00:59] Completed 102500 out of 250000 steps  (41%)
[01:29:29] Completed 105000 out of 250000 steps  (42%)
[01:57:58] Completed 107500 out of 250000 steps  (43%)
[02:26:28] Completed 110000 out of 250000 steps  (44%)
[02:54:56] Completed 112500 out of 250000 steps  (45%)
[03:23:26] Completed 115000 out of 250000 steps  (46%)
[03:51:58] Completed 117500 out of 250000 steps  (47%)
[04:20:28] Completed 120000 out of 250000 steps  (48%)
[04:48:59] Completed 122500 out of 250000 steps  (49%)
[05:17:28] Completed 125000 out of 250000 steps  (50%)
[05:45:59] Completed 127500 out of 250000 steps  (51%)
[06:14:30] Completed 130000 out of 250000 steps  (52%)
[06:42:58] Completed 132500 out of 250000 steps  (53%)
[07:11:28] Completed 135000 out of 250000 steps  (54%)
[07:39:59] Completed 137500 out of 250000 steps  (55%)
[08:08:29] Completed 140000 out of 250000 steps  (56%)
[08:36:59] Completed 142500 out of 250000 steps  (57%)
[09:05:28] Completed 145000 out of 250000 steps  (58%)
[09:33:59] Completed 147500 out of 250000 steps  (59%)
[10:02:27] Completed 150000 out of 250000 steps  (60%)
[10:30:56] Completed 152500 out of 250000 steps  (61%)
[10:59:28] Completed 155000 out of 250000 steps  (62%)
[11:28:00] Completed 157500 out of 250000 steps  (63%)
[11:56:29] Completed 160000 out of 250000 steps  (64%)
[12:24:59] Completed 162500 out of 250000 steps  (65%)
[12:53:28] Completed 165000 out of 250000 steps  (66%)
[13:21:57] Completed 167500 out of 250000 steps  (67%)
[13:50:23] Completed 170000 out of 250000 steps  (68%)
[14:18:52] Completed 172500 out of 250000 steps  (69%)
[14:47:22] Completed 175000 out of 250000 steps  (70%)
[15:15:53] Completed 177500 out of 250000 steps  (71%)
[15:44:25] Completed 180000 out of 250000 steps  (72%)
[16:12:55] Completed 182500 out of 250000 steps  (73%)
[16:41:27] Completed 185000 out of 250000 steps  (74%)
[17:09:58] Completed 187500 out of 250000 steps  (75%)
[17:38:29] Completed 190000 out of 250000 steps  (76%)
[18:07:00] Completed 192500 out of 250000 steps  (77%)
[18:35:29] Completed 195000 out of 250000 steps  (78%)
[19:03:58] Completed 197500 out of 250000 steps  (79%)
[19:32:28] Completed 200000 out of 250000 steps  (80%)
[20:00:59] Completed 202500 out of 250000 steps  (81%)
[20:29:30] Completed 205000 out of 250000 steps  (82%)
[20:58:02] Completed 207500 out of 250000 steps  (83%)
[21:26:33] Completed 210000 out of 250000 steps  (84%)
[21:55:02] Completed 212500 out of 250000 steps  (85%)
[22:23:35] Completed 215000 out of 250000 steps  (86%)
[22:52:05] Completed 217500 out of 250000 steps  (87%)
[23:20:33] Completed 220000 out of 250000 steps  (88%)
[23:49:04] Completed 222500 out of 250000 steps  (89%)
[00:17:33] Completed 225000 out of 250000 steps  (90%)
[00:46:06] Completed 227500 out of 250000 steps  (91%)
[01:14:34] Completed 230000 out of 250000 steps  (92%)
[01:43:05] Completed 232500 out of 250000 steps  (93%)
[02:11:36] Completed 235000 out of 250000 steps  (94%)
[02:40:08] Completed 237500 out of 250000 steps  (95%)
[03:08:38] Completed 240000 out of 250000 steps  (96%)
[03:37:08] Completed 242500 out of 250000 steps  (97%)
[04:05:39] Completed 245000 out of 250000 steps  (98%)
[04:34:09] Completed 247500 out of 250000 steps  (99%)
[05:02:37] Completed 250000 out of 250000 steps  (100%)
[05:02:43] DynamicWrapper: Finished Work Unit: sleep=10000
[05:02:53] 
[05:02:53] Finished Work Unit:
[05:02:53] - Reading up to 52713120 from "work/wudata_04.trr": Read 52713120
[05:02:53] trr file hash check passed.
[05:02:53] - Reading up to 47145628 from "work/wudata_04.xtc": Read 47145628
[05:02:53] xtc file hash check passed.
[05:02:53] edr file hash check passed.
[05:02:53] logfile size: 200254
[05:02:53] Leaving Run
[05:02:57] - Writing 100228950 bytes of core data to disk...
[05:02:58]   ... Done.
[05:03:11] - Shutting down core
[05:03:11] 
[05:03:11] Folding@home Core Shutdown: FINISHED_UNIT
[05:03:12] CoreStatus = 64 (100)
[05:03:12] Sending work to server
[05:03:12] Project: 6900 (Run 47, Clone 9, Gen 18)


[05:03:12] + Attempting to send results [July 28 05:03:12 UTC]
[05:03:12] - Couldn't send HTTP request to server
[05:03:12] + Could not connect to Work Server (results)
[05:03:12]     (130.237.232.141:8080)
[05:03:12] + Retrying using alternative port
[05:03:12] - Couldn't send HTTP request to server
[05:03:12] + Could not connect to Work Server (results)
[05:03:12]     (130.237.232.141:80)
[05:03:12] - Error: Could not transmit unit 04 (completed July 28) to work server.
[05:03:12]   Keeping unit 04 in queue.
[05:03:12] Project: 6900 (Run 47, Clone 9, Gen 18)


[05:03:12] + Attempting to send results [July 28 05:03:12 UTC]
[05:03:12] - Couldn't send HTTP request to server
[05:03:12] + Could not connect to Work Server (results)
[05:03:12]     (130.237.232.141:8080)
[05:03:12] + Retrying using alternative port
[05:03:12] - Couldn't send HTTP request to server
[05:03:12] + Could not connect to Work Server (results)
[05:03:12]     (130.237.232.141:80)
[05:03:12] - Error: Could not transmit unit 04 (completed July 28) to work server.


[05:03:12] + Attempting to send results [July 28 05:03:12 UTC]
[05:03:12] - Couldn't send HTTP request to server
[05:03:12] + Could not connect to Work Server (results)
[05:03:12]     (130.237.165.141:8080)
[05:03:12] + Retrying using alternative port
[05:03:12] - Couldn't send HTTP request to server
[05:03:12] + Could not connect to Work Server (results)
[05:03:12]     (130.237.165.141:80)
[05:03:12]   Could not transmit unit 04 to Collection server; keeping in queue.
[05:03:12] - Preparing to get new work unit...
[05:03:12] Cleaning up work directory
[05:03:14] + Attempting to get work packet
[05:03:14] Passkey found
[05:03:14] - Connecting to assignment server
[05:03:14] - Successful: assigned to (130.237.232.141).
[05:03:14] + News From Folding@Home: Welcome to Folding@Home
[05:03:15] Loaded queue successfully.
[05:03:25] Project: 6900 (Run 47, Clone 9, Gen 18)


[05:03:25] + Attempting to send results [July 28 05:03:25 UTC]
[05:03:25] - Couldn't send HTTP request to server
[05:03:25] + Could not connect to Work Server (results)
[05:03:25]     (130.237.232.141:8080)
[05:03:25] + Retrying using alternative port
[05:03:25] - Couldn't send HTTP request to server
[05:03:25] + Could not connect to Work Server (results)
[05:03:25]     (130.237.232.141:80)
[05:03:25] - Error: Could not transmit unit 04 (completed July 28) to work server.


[05:03:25] + Attempting to send results [July 28 05:03:25 UTC]
[05:03:25] - Couldn't send HTTP request to server
[05:03:25] + Could not connect to Work Server (results)
[05:03:25]     (130.237.165.141:8080)
[05:03:25] + Retrying using alternative port
[05:03:25] - Couldn't send HTTP request to server
[05:03:25] + Could not connect to Work Server (results)
[05:03:25]     (130.237.165.141:80)
[05:03:25]   Could not transmit unit 04 to Collection server; keeping in queue.
[05:03:25] + Closed connections
[05:03:25] 
[05:03:25] + Processing work unit
[05:03:25] Core required: FahCore_a5.exe
[05:03:25] Core found.
[05:03:25] Working on queue slot 05 [July 28 05:03:25 UTC]
[05:03:25] + Working ...
[05:03:25] 
[05:03:25] *------------------------------*
[05:03:25] Folding@Home Gromacs SMP Core
[05:03:25] Version 2.27 (Thu Feb 10 09:46:40 PST 2011)
[05:03:25] 
[05:03:25] Preparing to commence simulation
[05:03:25] - Looking at optimizations...
[05:03:25] - Created dyn
[05:03:25] - Files status OK
[05:03:27] - Expanded 24864343 -> 30796292 (decompressed 123.8 percent)
[05:03:27] Called DecompressByteArray: compressed_data_size=24864343 data_size=30796292, decompressed_data_size=30796292 diff=0
[05:03:27] - Digital signature verified
[05:03:27] 
[05:03:27] Project: 6900 (Run 39, Clone 0, Gen 24)
[05:03:27] 
[05:03:27] Assembly optimizations on if available.
[05:03:27] Entering M.D.
[05:03:33] Mapping NT from 8 to 8 
[05:03:36] Completed 0 out of 250000 steps  (0%)
[05:32:06] Completed 2500 out of 250000 steps  (1%)
[06:00:35] Completed 5000 out of 250000 steps  (2%)
[06:29:05] Completed 7500 out of 250000 steps  (3%)
[06:57:33] Completed 10000 out of 250000 steps  (4%)
[07:26:03] Completed 12500 out of 250000 steps  (5%)
[07:48:30] Project: 6900 (Run 47, Clone 9, Gen 18)


[07:48:30] + Attempting to send results [July 28 07:48:30 UTC]
[07:51:17] + Results successfully sent
[07:51:17] Thank you for your contribution to Folding@Home.
[07:51:17] + Number of Units Completed: 4

[07:54:32] Completed 15000 out of 250000 steps  (6%)
[08:23:00] Completed 17500 out of 250000 steps  (7%)
[08:51:30] Completed 20000 out of 250000 steps  (8%)
[09:19:59] Completed 22500 out of 250000 steps  (9%)
[09:48:24] Completed 25000 out of 250000 steps  (10%)
[10:16:54] Completed 27500 out of 250000 steps  (11%)
[10:45:23] Completed 30000 out of 250000 steps  (12%)
[11:13:53] Completed 32500 out of 250000 steps  (13%)
[11:42:23] Completed 35000 out of 250000 steps  (14%)
[12:10:51] Completed 37500 out of 250000 steps  (15%)
[12:39:21] Completed 40000 out of 250000 steps  (16%)
[13:07:52] Completed 42500 out of 250000 steps  (17%)
[13:36:20] Completed 45000 out of 250000 steps  (18%)
[14:04:50] Completed 47500 out of 250000 steps  (19%)
[14:33:20] Completed 50000 out of 250000 steps  (20%)
[15:01:50] Completed 52500 out of 250000 steps  (21%)
[15:30:20] Completed 55000 out of 250000 steps  (22%)
[15:58:49] Completed 57500 out of 250000 steps  (23%)
[16:27:20] Completed 60000 out of 250000 steps  (24%)
[16:55:49] Completed 62500 out of 250000 steps  (25%)
[17:24:17] Completed 65000 out of 250000 steps  (26%)
[17:52:46] Completed 67500 out of 250000 steps  (27%)
[18:21:17] Completed 70000 out of 250000 steps  (28%)
[18:49:44] Completed 72500 out of 250000 steps  (29%)
[19:18:09] Completed 75000 out of 250000 steps  (30%)
[19:46:41] Completed 77500 out of 250000 steps  (31%)
[20:15:10] Completed 80000 out of 250000 steps  (32%)
[20:43:39] Completed 82500 out of 250000 steps  (33%)
[21:12:09] Completed 85000 out of 250000 steps  (34%)
[21:40:38] Completed 87500 out of 250000 steps  (35%)

Thats my last unit to the current one.

It appears to struggle when sending the workunit then after a few failed attempts it works..

Code:

[07:45:36] + Attempting to send results [July 26 07:45:36 UTC]
[07:48:25] + Results successfully sent
[07:48:25] Thank you for your contribution to Folding@Home.
[07:48:25] + Number of Units Completed: 3

and whats -verbosity 9

J.

 

62K points in 1.5 days is 41K PPD

-verbosity 9 is the flag that controls how much information goes into the logfile. Most of the useful stuff goes in just after the line of asterisks, which you appear to have edited out. Or maybe it's a line of hashes.

You do not appear to be running langouste, which can gain you extra folding time, rather than waiting for the upload to complete. It makes the logfile look worrying at first but if you read the ReadMe file most is made clear.

 

Thanks for that, is it worth adding the -verbosity 9 flag then? I'm running langouste, I followed the steps in the linux guide and had no issues, is there a way to confirm its running?


...

J.

 

Joe, looking at your log file you seem to be completing 1% of a 6900 in approx 28-29mins, my machines running at 4.5GHz do the same in approx 23mins. I'm using the latest 2.6.38-10-generic-ck kernel in Ubuntu 11.04.

Re your points, they are based on the time the data is received by Stanford. If there has been a delay in uploading, your points will will be reduced I'm afraid.

 

Why on earth are you running the windows client under wine? Use the native linux client as shown in the guide, this is almost certainly why it's running so slow.

 

he isn't, the core always carries an '.exe' even on linux

 

Thats right, I'm not, it's all native. So how do I go about fixing this one then?..

J.

 

Yes, add the -verbosity 9 flag. The information it puts in the logfile is useful.

Your logfile does not show langouste running. Are you sure you followed the instructions properly? Take a look at the ReadMe in the langouste folder for more information. Once we get your client working properly, you should address this, but the client is more important.

 

Your FahCore_A5.exe icon is not the standard one. Are you sure you installed the correct client? We need the information at the top of your logfile. Please post everything in your logfile.

 

doh sorry, I mistook the core exe for the client exe, I'm posting this on my phone that's my excuse

 

I tried posting the whole log file but it was too big, I got a post error about to many characters, I'll do it again but cut out whats not needed.

When I set the client and langouste up I followed the GUIDE word for word I'm sure of it. Could the client in the guide be an old client?

I used this:

Code:

cd fah
wget "http://www.stanford.edu/group/pandegroup/folding/release/FAH6.34-Linux64-SMP.exe"
mv FAH6*.* fah6
chmod 755 fah6

So 6.34?

Thanks for the great help guys.

J.

 

6.34 is definitely the latest Linux client.

 

Hey Guys,

Finally got round to adding the -verbosity9 flag and taking a closer look at my langouste install, as far as I can see, its installed correctly (how can I tell if its running?) the FAH client is configured to use it (proxy) and I'd added it to the boot file (type thing..) so... I'm guessing its in there??


...

My last BidAdv work unit however, if failing to send.. it just keeps trying and getting nowhere...

I'll post the log. Thanks for the help guys.

J.

 

Hmmmm, by adding -verbosity9 have I overwritten -bigadv??

Code:

--- Opening Log file [August 11 18:37:11 UTC] 


# Linux SMP Console Edition ###################################################
###############################################################################

                       Folding@Home Client Version 6.34

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: /home/joey/fah
Executable: ./fah6
Arguments: -configonly -smp -bigadv 

[18:37:11] - Ask before connecting: No
[18:37:11] - Proxy: 127.0.0.1:8880
[18:37:11] - User name: HackJoe (Team 35947)
[18:37:11] - User ID: 6B3050B83E8FC00D
[18:37:11] - Machine ID: 1
[18:37:11] 
[18:37:11] Configuring Folding@Home...


[18:39:25] - Ask before connecting: No
[18:39:25] - Proxy: 127.0.0.1:8880
[18:39:25] - User name: HackJoe (Team 35947)
[18:39:25] - User ID: 6B3050B83E8FC00D
[18:39:25] - Machine ID: 1
[18:39:25] 
[18:39:25] -configonly flag given, so exiting.


--- Opening Log file [August 11 18:42:10 UTC] 


# Linux Console Edition #######################################################
###############################################################################

                       Folding@Home Client Version 6.34

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: /home/joey/fah
Executable: ./fah6
Arguments: -verbosity 9 

[18:42:10] - Ask before connecting: No
[18:42:10] - Proxy: 127.0.0.1:8880
[18:42:10] - User name: HackJoe (Team 35947)
[18:42:10] - User ID: 6B3050B83E8FC00D
[18:42:10] - Machine ID: 1
[18:42:10] 
[18:42:10] Loaded queue successfully.
[18:42:10] 
[18:42:10] + Processing work unit
[18:42:10] - Autosending finished units... [18:42:10]
[18:42:10] Core required: FahCore_a5.exe
[18:42:10] Trying to send all finished work units
[18:42:10] Core found.
[18:42:10] Project: 2685 (Run 6, Clone 20, Gen 98)
[18:42:10] - Read packet limit of 540015616... Set to 524286976.


[18:42:10] + Attempting to send results [August 11 18:42:10 UTC]
[18:42:10] - Reading file work/wuresults_01.dat from core
[18:42:11] Working on queue slot 02 [August 11 18:42:11 UTC]
[18:42:12] + Working ...
[18:42:12] - Calling './FahCore_a5.exe -dir work/ -nice 19 -suffix 02 -np 0 -checkpoint 15 -verbose -lifeline 1901 -version 634'

[18:42:12]   (Read 102616408 bytes from disk)
[18:42:12] Connecting to http://171.67.108.22:8080/
[18:42:12] - Couldn't send HTTP request to server
[18:42:12] + Could not connect to Work Server (results)
[18:42:12]     (171.67.108.22:8080)
[18:42:12] + Retrying using alternative port
[18:42:12] Connecting to http://171.67.108.22:80/
[18:42:12] - Couldn't send HTTP request to server
[18:42:12] + Could not connect to Work Server (results)
[18:42:12]     (171.67.108.22:80)
[18:42:12] - Error: Could not transmit unit 01 (completed August 11) to work server.
[18:42:12] - 6 failed uploads of this unit.
[18:42:12] - Read packet limit of 540015616... Set to 524286976.


[18:42:12] + Attempting to send results [August 11 18:42:12 UTC]
[18:42:12] - Reading file work/wuresults_01.dat from core
[18:42:12]   (Read 102616408 bytes from disk)
[18:42:12] Connecting to http://171.67.108.25:8080/
[18:42:12] - Couldn't send HTTP request to server
[18:42:12] + Could not connect to Work Server (results)
[18:42:12]     (171.67.108.25:8080)
[18:42:12] + Retrying using alternative port
[18:42:12] Connecting to http://171.67.108.25:80/
[18:42:12] - Couldn't send HTTP request to server
[18:42:12] + Could not connect to Work Server (results)
[18:42:12]     (171.67.108.25:80)
[18:42:12]   Could not transmit unit 01 to Collection server; keeping in queue.
[18:42:12] + Sent 0 of 1 completed units to the server
[18:42:12] - Autosend completed
[18:42:12] 
[18:42:12] *------------------------------*
[18:42:12] Folding@Home Gromacs SMP Core
[18:42:12] Version 2.27 (Thu Feb 10 09:46:40 PST 2011)
[18:42:12] 
[18:42:12] Preparing to commence simulation
[18:42:12] - Ensuring status. Please wait.
[18:42:21] - Looking at optimizations...
[18:42:21] - Working with standard loops on this execution.
[18:42:21] - Previous termination of core was improper.
[18:42:21] - Files status OK
[18:42:23] - Expanded 24859707 -> 30796292 (decompressed 123.8 percent)
[18:42:23] Called DecompressByteArray: compressed_data_size=24859707 data_size=30796292, decompressed_data_size=30796292 diff=0
[18:42:23] - Digital signature verified
[18:42:23] 
[18:42:23] Project: 6900 (Run 7, Clone 4, Gen 24)
[18:42:23] 
[18:42:23] Entering M.D.
[18:42:29] Using Gromacs checkpoints
[18:42:31] Mapping NT from 1 to 1 
[18:42:34] Resuming from checkpoint
[18:42:34] Verified work/wudata_02.log
[18:42:35] Verified work/wudata_02.trr
[18:42:35] Verified work/wudata_02.xtc
[18:42:35] Verified work/wudata_02.edr
[18:42:41] Completed 75250 out of 250000 steps  (30%)

Ooops

J.

 

Thats bigadv...

Verbosity only changes how regularly the client updates I believe.

 

Langouste is prone to doing some unpredictable things. I helped tear trouble shoot a while back & had it running very reliably but still the odd time it would fail (probably fah server related). Check the guide on the f@h forums to make sure all settings are setup to avoid any hiccups.


I could be wrong but it looks like musky's guide downloads langouste 3.0-15.6 instead of 3.0-15.7 which is the latest update (with linux fix).