1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Case Mod - In Progress Zelda Desk Project

Discussion in 'Project Logs' started by Mikhail, 10 Mar 2014.

  1. Mikhail

    Mikhail What's a Dremel?

    Joined:
    5 May 2012
    Posts:
    4
    Likes Received:
    0
    [​IMG]

    Banner made by Mr3D aka Daniel G Ask.

    Hey there everyone! Some people may have heard about my Zelda project before. For those that didn't...Well I think I can safely say you're in for a good ride. =)

    First a summary of my hardware:

    Mobo / Motherboard: Asus Rampage IV Extreme
    CPU: Intel i7 3930K C2
    GPU: 3x ASUS GTX Titans
    RAM: 8GB GMTGX8 => will be upgrading as soon as money permits it.
    PSU: EVGA Supernova NEX 1500W
    SSD: OCZ Vertex 4 "512Gb Version" + Samsung 830 "256Gb Version"
    HDD: 9x Seagate Barracuda 3TB + 2 x 2TB + 2 x 1TB + 250 GB.
    Raid Card: Highpoint RocketRAID 2722
    Fans: 14x Corsair Air Series SP120 Quiet Edition
    Screens: 3x Asus VG278H + 1 x BenQ XL2720T
    Headset: Razer Tiamat 7.1
    Keyboard: Steelseries 7G
    Mouse: Steelseries Sensei
    Extra Gamepad: Logitech G13
    Mousepad: Razer Manticor
    Monitor Mount: Freedom WSGF Edition Ultimate Desk Stand + wall mount kit

    Other: Logitech G27 Racing Wheel

    Watercooling / Liquid cooling equipment:

    Mobo: EK-FB KIT RE4 - [EN] (Nickel)
    CPU: EK- Supreme HF [EN] (Nickel) (surprise incoming)
    GPU: 3 x EK-FC Titan - Nickel
    RAM: 2x EK-RAM Dominator X4 [EN] (Nickel)

    Reservoir: Custom made Reservoir
    Rads: 2x XSPC EX360MP + 2x RX480 XSPC
    Pumps: 2x Laing D5-MCP655
    Top: 1x Bitspower D5-MCP655 Dual Top Acrylic Version
    Mod:Bitspower D5-MCP655 Mod Kit Matt Black Version
    Coolant: 3x Mayhems X1 UV-Green

    Monitor equipment:

    Aquero 5 PRO + frontplate aluminium black
    Waterblock for the Aquero 5 PRO
    1x Flow sensor for Aquero 5 PRO
    2x Temperature sensor internal / external thread
    6x Poweradjust 2 USB, Ultra version
    Multiswitch USB 1.41 + frontplate aluminum black

    I might have forgotten one or two things but....I'll get back to that later. It's not over yet since a lot of things might be added soon! ^^

    The cherry on the cake, the thing that is making all of this happen =>

    The Cross desk

    So after waiting for a LONG time I finally get the desk of my dreams. I was at work at that time so I was lucky someone was home to answer the door!

    I just couldn't wait to get home to build all of it :D
    Wasn't really expecting it to be as big as it was and certainly not as heavy. I carried it up two flights of stairs and by god was I beat. Glass is really thick and heavy too lol.

    Main body, accessories for the Cross desk and glass:

    [​IMG]

    The feet:

    [​IMG]

    Let the building begin with the instructions ^^

    [​IMG]

    I hope you won't mind but I didn't really had a third hand to photograph everything while I had to work my way through holding the two feet straight up and screw the back-hex onto them.

    But here it stands in all its glory :D

    [​IMG]

    I've also added my two reservoirs to see if they would fit ^^" I did everything on "theoretical measurements" so seeing that it was a perfect fit was such a huge relief!
    If you want more pics off the reservoirs just click here!

    Pictures of the reservoirs were taken by LinkWed. He does some GREAT pictures and you'll see him soon in the buildlog pictures as I'm sure he'll swing by sometime ^^

    Thanks Charles!

    [​IMG]

    [​IMG]

    I did a bit more than that though....but that'll have to wait for tomorrow! Tomorrow: Unloading my case labs and getting desk ready !

    Thanks for reading people and if you have any questions / remarks to give please do. It's my first "real and serious" build log. I only wish to learn :D
     
    Last edited: 10 Mar 2014
  2. Concept73

    Concept73 Wannabe modder.

    Joined:
    30 Aug 2013
    Posts:
    648
    Likes Received:
    31
    IM FIRST, LOVE OF LOVE!!!!!!!!!!!!!!!!!!!!!!!

    BUILD LOG, ZELDA, WHOOP WHOOP!
     
  3. Combatus

    Combatus Bit-tech Modding + hardware reviews Staff Super Moderator

    Joined:
    16 Feb 2009
    Posts:
    2,756
    Likes Received:
    69
    Nice one Youri. Great to see a retail version of the desk being built up. Have fun!!!! :D
     
  4. l3p

    l3p www.^.nl

    Joined:
    1 Nov 2010
    Posts:
    832
    Likes Received:
    71
    Going to follow it everywhere! :D
     
  5. Mikhail

    Mikhail What's a Dremel?

    Joined:
    5 May 2012
    Posts:
    4
    Likes Received:
    0
    haha :D Thanks man ! Always great to see your support ^^


    Well it was bound to happen some time haha. Glad to be one of the first ones. I waited patiently and I hope I won't let anyone down. Still LOADS to do....but it's going to be worth it I believe.
    Thank you for your kind words in any case =)
    Let the fun begin !

    L3P you're just a damn stalker admit it :D Thanks man. Your advice and eyes are always welcome =)
     
  6. thenotincluded

    thenotincluded What's a Dremel?

    Joined:
    17 Jul 2012
    Posts:
    19
    Likes Received:
    1
    I'd love a desk like that. Desk rigs are awesome
     
  7. Roboduck

    Roboduck 01110001 01110101 01100001 01100011

    Joined:
    1 Dec 2009
    Posts:
    549
    Likes Received:
    24
    Sub'd

    :p
     
  8. Derick

    Derick Senpai Studios

    Joined:
    26 May 2012
    Posts:
    101
    Likes Received:
    0
    Love me some Zelda. Can't wait to see the results.
     
  9. Hukkel

    Hukkel James' minion

    Joined:
    20 Dec 2012
    Posts:
    1,284
    Likes Received:
    25
    Great to see you here Youri!

    Can't wait to see it in person.

    Have fun building!
     

Share This Page