Case Mod - In Progress CYBERPUNK 2077 O.F.

HARDWARE
CASE COOLER MASTER MASTERFRAME 700
ASUS ROG Maximus Z790 HERO
Intel Core i9-14900K
ROG Strix GeForce RTX® 4080 OC Edition 16GB GDDR6X
Corsair 96GB (2x48GB) 5200Mhz DDR5
Asus ROG STRIX 1000W GOLD
SSD FURY Renegade 4TB PCIe 4.0 NVMe
SSD FURY Renegade 4TB PCIe 4.0 NVMe
COOLING CUSTOM EKWB

stay tuned....
​

 

I'm in

 

Hi guys hardware shots!

 

Hi guys we start. Creating the LED housing plate, this case has a dual function is a case but also a benchmark houses that can be used as a tester, it has a lot of holes that in my case must be covered, my intention is to build a LED plate with themed graphics.





I make a cardboard shape to calculate the dimensions that I will then go to use EPR the cut on acrylic.








Make a cardboard silhouette to calculate the dimensions that I will then go to use EPR the cut on acrylic.















These 2 panels will be superimposed ..

 

EKWB component arrived


I chose these fans the EKWB QUANTUM PULSE



as well as being beautiful they have a different connection system which I wanted to try is a waterfall which eliminates many centimeters of extra cable. They are connected to each other through these 68 pin cables (power and RGB) only the last fan is connected to the appropriate cable which converts the 8 pins into split 2 cables, the classic 2 fan power points and the 3 ARGB pins which go to the motherboard and to the rgb controller.



two quantum surface series radiators, interesting feature is that it has inlets and outlets at both ends with significant advantages.










14mm tubes my favorites

 

working on fangrill





















little rear panel on the case..



paiting the motherboard tray cover.



rear case panels







graphics applied soon

 

Panels look like have been laser etch