http://metku.net/index.html?sect=view&n=1&path=mods/rottaflekti/index_eng and this was over two years ago... ripoff :nono:
RollerCoaster Tycoon (1 and 2) was quite popular in my little relative's comp... And the requirements shouldn't be very high And other...
Unless Astropulse takes over... But that will take some time. The beta was a disaster most time. On some computers it was impossible to get it...
Or - http://www.spam.com/ci/ci_in.htm
Similar question.. I bought some EL wire, but the inverter was broke. It only flashed once while turning it on. Unfortunately the inverter was...
Have you seen 1 lcd that required -5V? Everything else is standard though...
thanks jace055 :) Problem solved. After a quick trip to the local electronics shop and little soldering later the lcd works! moral of the...
After months of waiting my lcd finally arrived (bunch of misunderstandigs and whatnot). Started to wire it up straight away. First thing was that...
Unfortunetely newer WD Caviar drives don't have a temp sensor. But a nice, freeware temp monitoring program is dtemp -...
Can't find a pic but here's a link How do you get 15 people in one car? if 5 wasn't enough for one car...
I don't mean to threadjack, but what probs excactly? After burning cd-s and checking them, there are errors starting around 60% from the start? Or...
Yes, the epox has the chip (i own one too) but for some reason epox has not packaged it with a complete SoundStorm solution. By that i mean extra...
before it was also about:blank, opens quickly but now it's countdown til PC version of GTA: Vice City comes out... damn consoles
Then what about the rojakpot article? It says there that in order to get SoundStorm certification the board must have but 8rda+ only has 3...
I think you ment Abit. Epox 8rda+ doesn't have soundstorm, for that you must order an extra SPDIF out. Only Soundstorm certified plates are: -...
8RGA is with integrated video... Asus would be my choice also. Or if money is an issue (barton... seems not ;)) check out the abit nf7-s rev1.2
www.8rdafaq.com - in the BIOS section
slk-800 w/ noname silent 80mm fan (don't know the rpm-s, came from an old AT psu). xp1800 palomino was max 43C, xp1800 thoroughbred 34C. Full load...
There's a guide on the AS page - http://www.arcticsilver.com/arctic_silver_instructions.htm And it says only a paperthin layer is necessary. Too...
Maybe the Epox mobo doesn't show 3.3 correctly... I know that my 8rda+ shows VDimm instead on +3.3 (so it's showing 2.6V). Mainly because the mobo...
Separate names with a comma.
