the coolermaster is a great heatsink as you can fit it with a 140mm fan !!!!
http://www.ebay.com/itm/Scythe-Ninja-Plus-AM2-Heatsink-SCNJ-1100P-/230777056150?pt=LH_DefaultDomain_0&hash=item35bb626b96#ht_6778wt_1282 this is...
The best fan for that case is either a Scythe Ninja or a Noctua C14... Max clearance size for those cases are 150mm, I know this because I have a...
we use fiber, but as a backbone network and then use cat5e on the machine to conect to the switch.... its overkill to conect to machine with fiber...
the water temps I,ve got them from the innovatek power calculator... they are a aprox so they should be only as a reference... anyway I'm only...
nope the radiator is in the top of the case and it blows out the top.... the thing is that I'm wondering if it would be better to just cool the...
new data http://processorfinder.intel.com/details.aspx?sSpec=SL9UM says that the q6600 is 105w so that gives me a 240 watt of heat between the...
in one of the thread a placed a link to the project log of the case.. its a coolermaste wavemaster (a clasic) but the thing is that I don't want...
so it means that I should have the ability to dissipate 185w of heat from the 8800gtx and 130w from the c2q, although it would only be when maxed...
The total TDP of the 8800 GTX is 185W, although you are likely to see only a full pull of around 150W under load... so if tis is true than the...
http://www.swiftnets.com/products/MC8800.asp will this lower the thermal load on the radiator to make it viable or is it pushing it to hard on...
my doubt comes from the fact that the c2q isn't always at the top so I could gain from that... but the problem occurs that the case won't allow me...
I'm finishing build my gaming pc, and I'm watercooling the cpu and the gpu, but I have a big doubt..... Will one Black Ice GTS Stealth 120 be...
yeah zhanqmaster that is exactly what I was looking for.... I'll have to look for it in spain now!! :)
sorry to point this out.... but I don,t get the idea of two io chip, if the card is a gx2 then there is no need for two NVio chips on the card......
TapperSwe: thanks man comming from you that means alot.... nice fangrill you got going on!!! the thing is that I don't want to use 90º elbows, so...
so I'm back with the little mod that i had going on, the thing is that I managed to get another backplate, so it was a clean start for me...
just got myself another mobo plate from a pratorian...... will measure four times cut once to avoid the mistakes done before... will post when I...
well the upper hole was placed a little of place so I can have access to the backpart of the mosfets without having to take the motherboard out....
I don´t know exactly what you are asking, but if you´re wondering if a dual core athlon64 x2 is compatible with a 939 board then the answer is...
Separate names with a comma.
