Cooling Extreme Kooling Case Gallery

My PC Spec:
XP2600+M @2700mhz, 2.05V (2.82ghz, 2.1Vcore for bench marks)
DFI NF2 ultra infinity with Vcore, Vsense and overcurrent mods
Galaxy 6800nu with all pipelines unlocked
2X512 + 2X256 KHX BH-5 230mhz, 2-2-2-1

My watercooling spec:
2X heatercore with 2X 120mm YS-tech 38mm thick fans (painted UV reactive blue)
1X D4 pump
All the above in a radbox
Cathar Cascade waterblock
KKFAI 6800 waterblock
Dual T-line

My case (a black widow)


In the dark with all the UV and stuff:


How my dual rad are setup in my radbox:

 

Dual XEON Watercooled Rig

First Watercooling Rig (A work in progress):

THE MOTHERSHIP:

 

Here is my friends rig I built for him. Well watercooling part I built on it.







It is a prescott 775 chip 3.0ghz @ 4.0ghz
6600gt @ 600 core and 1250mem

1gig pc 5400ram

160gb wd sata hdd

and I have a swiftech block/ danger den gpu block/ swiftech 12v pump/ car heatercore dual thermaltake thunderblade 120mm fans/ I also built the water tank out of pvc tubing.

All that is in 1/2id coper sweated tubing and 1/2id vynil thick wall tubing.

Sweet performer and good project.

Here is the log
http://forums.bit-tech.net/showthread.php?t=82760

 

My Project: Solaris.
Project Log Here







See the log for details, my first watercooled system, and my first proper system mod.

 

My Project: Lunaris
Follow up to Solaris, I'm sure you can spot the link
No project log yet, but I'm sure i'll get one done sometime...







by the way, yes that is a mixed nuts pot as a pump box... I will get round to taking the label off at some point....

 

My second water project






appologies for the poor pics, were taken with my phone

 

[Coolercases Overload]


(click-4-big)

(click-4-big)

(click-4-big)

-specs-
[hardware]
Abit nF7s-v2
XP2500
1GB Winbond CH-5
2xWD Raptors 36GB
Sond DVD+/-
[cooling]
BIX Gold + Ally papst fan
2 x Thermochill 80.1s
2 x DD D4s
Little Rivers Cascade SS
DD Maze 4 [northbridg]
DD Maze 4 [GPU]
Aquacomputer Mosfet block
Aquacomputer Chipset [southbridge]
2 x Innovatek HDD-O-Matics
DD Duel floppy rez
Innovatek Tank-O-Matic


Morgan.

 

heres pics of my rig

specs:
danger den lga 775 tdx blok
danger den intel chipset block
danger den maze 4 actel block
single heatercore
double heatercore
hydor l-20 pump
ehiem 1250 pump

 

Heres one of mine about all i have at the minute




more info can be found here

http://forums.bit-tech.net/showthread.php?t=89303

 

Full gallery here.

Specs:

Lian Li 1200B
Tyan k8we w/ scsi
2x Opteron 250 E4 @ 1.45v & 12x234HTT (2.8 GHz) stable
4x OCZ4001024SSER
1x XFX 6800GT @450/1140 (2 later)
1x Audigy 2zs
1x Seagate 15k.4 36GB
2x Seagate 7200.8 200GB (mirrored)
1x Plextor PX-716SA
1x OCZ PowerStream 600W
1x Dell 2405FPW

Cooling:
2x MCP350 (inlet modded)
1x BIP2 (cpu loop)
1x BIP (gpu & chipset loop)
2x MCW6000 (Opteron 250's)
3x GPU-180-H06 (gpu, AMD 8131, Nvidia 2050)
1x GPU-180-L06 (Nvidia 2200)
1x MCRES-525 (for both loops)
4x Panaflo M1A
3x Mini-Coolshroud for 120mm BI rads
1x NXP-201 Fan Controler
Distilled Water + Zerex

 

Here's the first case I ever did from a few years ago. The entire WC system was done in copper tube and I made the waterblock from an Alpha PAL8045. The case is a pretty much stock PC-60.

 

And here's my second water cooling job. It's a custom stainless steel tube frame that is actually used as part of the WC system. The left side is used a a distribution manifold and the right side is used as a reservoir. It has the midsize Eheim pump pushing through Dangerden blocks for the CPU, GPU, and chipset. Up top are two Hayden transmission coolers. The two 120mm fans under the coolers are unused, the only fan in the system that runs is in the PSU.

 

Lian Li PC60 modded to accept 120mm BIX.

 

Ventmaster

Wavemaster (Black)
Asus SK8V (Socket 940)
AMD Athlon FX53
600watt Enermax Noisetaker PSU
2x 512mb OCZ PC3500 EL-DDR ECC (Registered)
2x Western Digital Raptor 36.7GB in Stripe Raid Zero
Gainward 6800 Ultra Golden Sample
Sony DWU-18A 8x DVD±RW ReWriter (Black)


Water Cooling:-

TDX Athlon64
NV-68 GPU Block
Laing D5 12volt Pump (PolarFlo Chrome Kit)
Thermochill 120.2 Rad
2x Noise Blocker Fans
Dual Floppy Bay-Res
WaterCool Fan Grill
D-Tek Pressure Gauge
Danger Den Hose

 

Sprocket...

-Silverstone TJ-06 case
-DFI LP NF4 SLI DR
-AMD a64 3500+ Winchester
-Patriot EP (2x512MB)
-XFX 6800GT
-WD Raptor (36GB)
-Plextor SATA DVD-RW
-Antec NeoPower 480W

-DD TDX
-DD NV-68
-Polarflo TT series pump
-Weapon 302 HC/shroud (w/ 2x SanyoAce 120x38mm fans)
-Typhoon rez
-1/2" id x 3/4" od Tygon R-3603

 

Ediejo's Lian Li with Promenteia Mach GT2 CPU Cooler.
Dual watercooling one for chipset one for the videocards.

 

Lian li PC7 Plus

 

loop 1
Cascade SS
D4
BIX
120.3
Bayres

Loop 2
D4
inovatek nb
inovatek GPU Front + Back
Mosfet block
Tank-o-matic
120.1
BIP Dual
BIP

morgan.

 

Here is my first wc rig....

MCP-350 Pump
MCR-525 bay reservoir
MCW-50 Video Card WB
MCW-20 NB WB
DTek Whitewater CPU WB
DTek Radiator
2x120mm Fans

 

Big Blue

Been a while, but I'm back, with a now stable w/c setup:



Side view, You can probably spot the res, cpu block, and guess where the pump is, but where's the rad?



Yup, the rad is wedged in the 50mm gap between the top of the case and the top of the power supply.
To pull air thru the rad I've replaced the stock 120mm fan with one of them akasa amber one's and flipped the PSU. Air is drawn down, through the radiator, though the PSU and out of the back. The little platform on stand-off's is to protect the fins of the rad and so I've got somewhere to pile my cd's on

Specs:
DFI nForce 3 250 mobo (S754 and AGP only unfourtunately)
Athlon64 3700+ cooled by an Aquacomputer Cuplex XT block.
GFX, was a Gainward 6600GT, with a cooler from Aquacomputer, but that broke (apparently the water that ended up on it during the leak test did some damage), so right now it's my old 9600XT, but as soon as the CityLink guy turns up I'll be fitting a 6800


The radiator was supposed to be a BIX, but ended up being an "Alphacool NexXxoS Xtreme" (bloody supplier )
The pump is an Eheim 1048.

Temps:
Before - (Zalman 7700 Al-Cu)
Idle ~ 40
Load ~ 50

Now -
Idle ~ 50
Load ~ 60
and slightly noisier...
(oh, and yes, I am using duct tape as a fan shroud )