I recenlty replaced the LEDs on my new Sprint phone, and realized my wife's phone also needed an upgrade. -------------------------------------------------------------------------- My cell phone: http://www.sprintusers.com/forum/showthread.php?t=49341 -------------------------------------------------------------------------- I used to own this phone, and I gave it to my wife years ago. So the phone is pretty old, and the keypad is worn. But it still functions great, has long battery life, and lost of features that new phones have. -Speakerphone -Voice Dial -Assigned ringers -Wallpapers The phone has a cool translucent blue case, but an ugly green backlight. -------------------------------------------------------------------------- I then switched out all the LEDs inside for super-bright Blue LEDs. This mod was harder then my last phone, as I had to change the backlight LEDs, which are installed on a tiny PCB. The power to the LEDs is +3volts, and these LEDs have a forward rating of 3.5volts. Since their forward rating is less then the source voltage, I don't need to use a resistor for the LEDs. -------------------------------------------------------------------------- The final result is well worth it. I will also be keeping my eye for a used phone on eBay to replace the worn keypad. -------------------------------------------------------------------------- The bleeding blue through the casing kind of makes it look like a Tron phone.