Scratch Build – In Progress [project]6th GeN. 30TB - 2730W PSU ^^ Finale?!

Waterblocks decided upon aswell now, gonna go for OCZ HydroFlow HF-MK1 on all 3 mobo's ^^

*gottalovecopypaste*




HydroFlow HF-MK1 CPU Waterblock / For AMD, AM2, 775, 1366 / Core i7 Compatible

Designed with the highest possible exchange rate between the block and coolant, the HydroFlow can be easily integrated into any enthusiast water cooled system and help efficiently lower the processor temperature. The HydroFlow is compatible with AMD and Intel processors, including the latest generation Core i7 CPUs.

The triangular fins in the HF-MK1 provide the highest volume to surface ratio of any geometric shape for best dissipation possible, and this special design also creates sufficient turbulence to eliminate the “skin” effect caused by laminar flow. The base block of the HydroFlow increases center contact with the processor core for the greatest possible cooling potential, ensuring maximum exchange and functionality between the waterblock and CPU.

Whether you’re a first-time builder or a seasoned case-modder, OCZ makes the HydroFlow easy to integrate into your rig by supplying both high-flow 3/8” and 1/2” barbs in the packaging without the hassle of searching for compatible hardware.

 

This will be a huge and heavy case, if it is finished.
The the design looks interesting. I will follow your worklog. I'm intent on the weldings.

 

this case will get done

 

FINALLY, a update had my hands full with all kinds of stuff lately, so havent had much time to spare =/

anyways...


Lian Li HDD holder's

Maybe not the best with the mod spirit in mid,but its undoubtly one of the greater products for anti vibrating disks on the market 16x of them have been ordered, should be sporting a total of 48 disk slots !! and with lightweight alu ^^


Lian Li mobo tray

The same goes with this one, will keep stuff in place, 1 for the top, 1 for the bottom, and 1 for the middle, should be able to fit 2 fullsize atx and 1 m-atx this time around ^^

Oh... wait... 30 meters of square alu is on the way aswell ^^

 

Man you need to cut down on the pr0n! Jesus... 30 TB... Just insane.

 

Oh.. a little teaser to whats coming up....



Guess who got some new toys to play with ^^

 

Mmm...looks nice! Although, I think Finnpower went bankrupt.

 

love the toy!

 

Don´t defragment those hdd´s at same time or we will get helluva earthquake

 

A new day has come ^^

And time for a update, hopefully updates will come somewhat faster from now on

one of those LARGE boxes arrived today...


And guess whats inside!

3x lian li mobo plates! omfg ^^

aaaand....






A bunch of lian li hdd holders, should be possible to house 3 disks in each of these, each with their own rubber ringed screws

Have to get these things assembled in sections of 8 and 8, one for the top of the middle case, and one for the bottom

If everything goes after plan, the aluminium for the frame should arrive the upcoming tuesday ^^

 

jealous!!

how much did just the drive cages set you back alone? or were they comp'd?

Either way cant wait to see this alu...

 

270$ for the lot, 3 mobo trays and 16 disk holders

 

That's odd! I thought it would cost a ton (pretty much literally) to get that load of Lian-Li hardware...

 

well... allways help to have some insiders at lian-li, its a promotional thing =)

 

Ah that makes sense. I just thought you'd either get them for free or pay the full price. It would be silly if full price for all that stuff would be lower than that of their cases

 

under half price would be correct =)

 

The aluminium squares have been ordered up for the frame now, ended up on the following:

345x25x25mm - 08x
250x25x25mm - 14x
550x25x25mm - 14x
800x25x25mm - 04x

Gonna be ALOT of cutting and welding taking place soon, alu should arrive on tuesday, 20 meters ordered up ^^ 2mm tick

 

And this would be the welding plans for now =)

 

Wow this is going to be nuts!

 

A new day, new opportunities =)

As mentioned , more then 20 meters(!!!) of 25x25x2mm aluminium have been cut up today in appropriate lenghts..

The welding will start the upcoming thursday most likely, some results will finally show by then, OCZ have sendt 3x of their hyrdoflow aswell today, so should receive them sometime soon










Placed up the stuff i allready received just to see if everything fit as it should, and it really seem promissing this far, however... the middle mobo tray is rotated the wrong way have to cut and fit it to the mATX standard first








Next week this little fella will be visited =)


And for those of you that wanna see how a CNC Hecksaw works, click here

And a small view of the plating thats been ordered ^^