Case Mod - In Progress Project: Steampunk'd TJ11 DONE!!! October 2012 MOTM Winner!!!

Fantastically high standard! Man, I'm getting so jealous XD

 

This is simply amazing! Wonderful work!

Also, does that Lion Park happen to be in either Joburg or Durban? Asking because I believe I went to the exact place last time I visited my dad in Joburg!

 

That sleeve and that plaint job looks perfect.

Amazing project so far.

cumps,
ziza

 

That's the best guide I've seen for heat shrink less sleeving.

Nice pile of progress.

 

Haha cheers bud.

Thanks!

Thanks man!

Thanks!

Thanks! It is just outside of Joburgh.

Thanks!

Well thanks Waynio! Maybe you can do it in your build?

 

such an amazing case. this is just a magnificent case!

 

If I can get the money together for sleeving I will, nice & neat that, I'll be sure to use a cheap soldering iron though.

 

Happy to say that EK is sponsoring my build!!



Gregor was able to send me a few things. EK-Multioption 250 Basic Res, 8x 90 Degree rotary fittings and a T-Shirt.








Now for the update. It is kinda big because I have not had time to write it up so here goes.

I had to figure out a way to get the water from the res into the dual pump top. A direct run would not work so here is what I had to fashion out of fittings I had laying around. Kinda ugly but it works and its out of sight.



Got out my Curcial M4 128GB SSD and installed it on the Silverstone bay.



Found a 320GB HDD so I'll put that on there for now. I'm trying to get a 512GB SSD for games.



Now to figure out how to wire them all and make it look good...





I also cut the Slim ODD cable so only the power cable is left. I have to use a longer SATA cable than what came with it.




The 3-cable and 4-cable clips came in.





Added a bunch of them to the PCI-E cables and they look pretty good.






I finally got all the holes cut in the midplate so I put the leather on it.



Then I used a furniture marker to color the edges since its fabric and the back of the leather is white.





I like it.






Now for a fun mod. Old GTX 560Ti backplates.



Traced



Cutting and drilling is boring so I skipped that part... and now we have... leather backplates!



And gold brackets



I also covered the SLI bridge with some leather.



Looking good IMO...




I put the res in and added some random fitting to see how it will all work.










I had to make some brackets for the midplate to keep it level. The 24-pin cable pulls it down a bit in the back. Pics later of how they are mounted. (Ya I forgot to take them...)



But here is how it looks from the front.





Top panel before...



And after!



Paint the mesh gold and it looks great!




Painted all the thumb screws gold.



And installed.






Random shot...




Vacuum tubes!!



Playing around with how they will be sitting. (Not sure of final setup yet)





Cut the leds off the bottom so they sit flat on the midplate. I'll drill a hole under them for the LED.







I cut some small pieces of acrylic to hold the LEDs under the mid plate.








PROBLEM! I bought Yellow single LEDs instead of Amber so they don't match!!



I put in a order yesterday for some Amber ones and resistors.


I think we need some lighting.





Using a fan bus to power the LEDs







I bought 2 of these new ones since I only have 1 of the above one. (They have to be the same since I'm OCD like that)




I'm not set on only having Amber lights so lets add some switches so I can have white too!





Start making cables.



Finished. (More pics of this later)




Finally the rainy season is here! (It rains every... single... day...)





That's it for now! I have some more stuff coming this week so next weekend I will be busy.

Cheers till then,

Fuga

 

WTF? I didn't sub yet? Here's correcting that...

I love the colours, so using white LEDs would in my opinion suit the build much, much better than coloured ones.

 

simply amazing . keep up the wonderfull work

 

You are on a roll!! Awesome update...Loving the leather touches. Definitely the right leather choice

[EDIT] By the way, i think your before and after pics are exactly the same....

 

You just never know when to stop the awesome do you... One of the finest, most attentive and detailed mods I've seen in a long time! Absolutely impatient to see the end result :O

 

WOW the case illumination is simply perfect

Amazing build so far.

 

little question: will the leather not lose it's color because of heat (and maybe leds light)?

 

Thanks for the sub! I'll be adding white or off white SMD LED strips which is why I added the switches.

Thanks!

Thanks! Good catch... I'll fix that.

Thanks!

Thanks!

 

Here in England thats called everyday lol

Looking good dude I wish my pc was as good looking as yours

 

haha thanks!

 

looking like good quality modding! love the tubes.

 

Thanks

Here is a teaser of what I'm currently working on. Modding the EK-Multioption Basic 250 res.

 

Not a big update but an exciting one.

I wanted something to put behind the 2nd PSU bracket that looked cool so I made a stand.



Drilled a hole and covered it with leather.



And added a vacuum tube. I drilled out the bottom so I can put several LEDs in it to make it super bright.




Next up was to mod the EK-Multioption Basic 250 Res. I actually got some of this idea from B Negative.

Cut some leather.



And tested how it looked. Hmm needs something



Got a piece of aluminium.



Cut it and filed the edges



Painted it gold and cut a slot in the leather.



Taped off the res



Pained the end caps gold too




Put it all together and what do you get??





Not to toot my own horn but it looks freaking awesome. There will be 2 LED stop fittings in the top to illuminate the water inside.

Minor thing but I need move the top clamp up...




Thanks it! I changed up some things in an old build to get some more fittings for this one. I'll hopefully have some pipe next week so I can get the water going. Also my laser cut parts should be here the end of next week!

Cheers till next time,

Fuga