Wow simon_stz, that's a beauty! Nice work! Scorpia - I'll send you a PM with my user.c. A little low on comments but I think it's easy to...
Have played around with the source a little and achived two goals: 1 - I have connected a dual color led (red/green) to RA0 and RA1. I've...
Yes if the programmer can't verify the Pic something must be wrong. But - the fuses are really important! I've struggled with som ICSP today...
Just add a pin to pin 27 & 28 (PGC & PGD), one to ground and one to /MCLR. Recommended is to then to use a 10k resistor between the...
ch424: Good, I'll see forward to that. Might be mistaken about the LCD, thought the squares indicated correct init. Maybe the contrast setting is...
Seems like a good idea. The LCD looks like it started correctly, so the problem is probably with the PC-Pic communication. Check com-port setting...
Nice with a working 4550-hex, can't wait to try it! nhenhophach: That looks good, the difference between 4k7 and 5k won't matter. The (2S)C1815...
Not to fun to wait on the stuff like that :/ I did try with a 4550 now, but no success. I guess it's the config-bits again, had the same...
#3 - But the readings from a sensor don't really need to go to the computer if a fan controller is the goal. The Pic can handle that itself. But...
Has a little problems with connecting a rotary encoder now. I use a different kind without a switch, and the big questions was how to connect it....
Well I've got it working with LCDProc, wasn't that hard. I'm using the display right now on my Thin Client motherbord, it's using a 2,5" harddrive...
Great work, thanks! I tried to build something like this a while ago. Used a 4450 and LCDSmartie, never solved my problem with the display...
Separate names with a comma.
