Thanks!
That's a great idea. The only problem is the liquid cooling. If it was all air is be super easy. I'll have to keep that in mind! I've got a...
[img] Here I’ve got the loop filled and bled out. [img] And a quick shot while I was wiring up the fan controller. [img] Here it is all up...
[img] [img] I decided to order a full set of silicone dust covers from Mod Cover seeing how this PC will be in a pretty rough environment. I got...
[img] The fan control shroud is a perfect fit. [img] [img] I drilled the corner brackets like so so that the well nut will go through both the...
[img] I got the W2 CPU Block mounted and the LED connector plugged into the CPU fan header. [img] [img] Next up I worked on securing the...
[img] [img] I painted the i/o part black and installed the i/o shield. [img] With the motherboard mounted to the lower plate I marked and cut...
[img] I had to partially disassemble the PSU to get it to fit nicely under the lip of the casing. I also had to sand down the top edge of the...
[img] This drawer with the large BAJA sticker is the junk drawer. There's really no need for this to be here. It's full of junk and it's HEAVY....
Ok so this mod is already finished but I'm going to edit all the pics and post the entire build log here. I have a large 2-piece Husky toolbox...
looking nice!
Thanks :D
[img] So back to the light green issue...I had a bottle of Primochill UV Brite Green dye so I decided to squirt a bunch in - I ended up using...
I filled the loop with Mayhem's Pastel Mint Green. I like it but it's a tad too light for me - I was looking for something a little bit...
Separate names with a comma.
