Project with a name that should give indications about the style of processing. Based on BitFenix AEGIS will take shape this mod. The processing steps will be as follows: Disassembly the case study space overturning MB verticalization of VGA study of the loop assembling loop cable management The initial stages are the important ones, because it will give right or wrong to my project (deposited in my head). I hope that people who follow the project be pleased the photographic trip. A thank you is always have to sponsors to support these projects The specifics of this project are as follows: Case: BitFenix AEGIS PSU: BitFenix Fury 750G MB: ASUS Gryphon Z97 Armor Edition CPU: ------ VGA: ASUS Strix GTX960 RAM: HyperX Fury 16Gb 1866MHz SSD: SanDisk 240Gb FAN: BitFenix Spectre PRO Controller: BitFenix Recon The specifications of the loop: ...under working... DoktorTerror liquid-style
let us start with disassembly unscrewing 2 screws in the back can release the roof of the case and discover the top that can mount a radiator maximum of 280 (2x140). in the lower part of the case there are four screws that unhook the HDD cage. after removing some screws (front and sides) I removed the bay 5.25 "and the second HDD cage. ok I finished with the screwdriver .....relax! After some rivets the case is dismembered. start to take some measures...
I am pleased to announce the sponsorship by Aquatuning and Alphacool. Their sponsorship includes the entire watercooling section....that is not small Below some photos of the material supplied for the project The new fittings made by Alphacool Alphacool UT60 The waterblocks Alphacool NexXxoS XP³ Light - Acetal Nickel GPX-N 960 Combo pump & top by Alphacool And here also the new VGA. It is a ASUS Strix GTX960 that it replaces, as from the initial design, the MSI 7970 Lighting because of the excessive overall dimensions. I started remodeling the inside of the case, but does not show anything because I would go to spoil some details that will be in the next post.