Hi!! discussion here My project was made for a little home fileserver. Spec: -mATX ASrock P4I45GV motherboard -P4 1,5Ghz processor -3*mobilrack with 2 cooler -Plextor CD-RW the memo,harddisk and the power supply is not in the box becous of the money....I had to made this project in time for the compatition called Modtechall. Now i saw the compatition for the ECS motherboard so i make a try(I need to make a new family Pc) So....here is the idea for it!! the first name was X-Server but i had to understand that i can't make it just as i wabted.... I started to buy the parts: My mobo: processor: And here are the first pics of the case i made...sorry for no progress pics but my camera went RIP and i needed a new one...(too late) as you can see there were a few faults in the holes!! i needed to repair them later! I needed something new for window: made a 3mm deep and 30cm diameter ring for the smoke glass... after that i needed something for it that fitts in style: engrav work finished and have the color for its under: i have used a pasteboard for the white and fixed it in... The PSU: needed one for testing: it was a Codegen 300W mini sh*t so i dont needed !! I made a few styling work: and in place with new back: ohh and painted in black! now it's time for the frame: in place: needed some color for them : and a black coat for the front:
Now the inner view: points for mobo holding: It's a little funny but these are my mobo holding and they make a very good job!! mobo in place: now to the harder work: a few repairing : done!! i have used resin for it!! next i needed some air to get into the box: made a new blowhole on the right side of the box! then piant it black: result: finished: and now the finishing work: needed: -on/off swich -reset button -HDD/Power LED -2 vetillator for in/out air inner structure :befor/after
Ok now the power and the leds: -made 4 hole:3 on the front and 1 on the back(reset) -then painted it tho black for the theme: reset button next to the ventillator: i used a littel project box for the on/off button and led to cover them: ok everything in place: ok again this pic but if you look close you can see the project box and the cabling for it!!! on the MTH: the boy on the left corner of this pic is me )
Ok, I'm new here, so don't get mad at me if i say something stupid. . Is this viewable in other language? English or something? (Bulgarian will be best )
sorry but its only hungarian version!!it is only started after the weekend(there was the MTH compatition) but there is an english section in the forum and the page will be in english lang when i have time for translate it (maybe a week)!! the gallery is viewable(there is no text)!! so come and reg in!! ) forum Gallery the menu is on the right! by:KNova