Case Mod - In Progress [MOD]--=TERMINATOR=---Endoskeleton-100%HM

update needed

 

hello You are right

I give you the pictures of the update


Tracage of the scapula and the return of epaule with legs for a verins the echelle1

Decoupe in plexi 4mm

:
To get it

Click on the link and then on the 360 ° veiled source for the display of pieces
http://www.sideshowtoy.com/cgi-bin/category.cgi?item=8309&source=upsell
Same thing for spine





The place for vertebrate[/size]

Here terminator back, but the shoulder blades are too thin
So the solution is to add a small rib made Plexi 3 mm
Splitting the dremel and grinding closer to tracing, lime and sand the paper
I will weld The plexi with an old soldering iron

VOILA WHEN IT'S EVEN BETTER AND

Seen from behind shown here support the cut card mere fixing screw BTR but the back seems a bit empty therefore has to see for stiffeners
Major returns will be decoupés

A view of the whole fixation with the hard drive
The weight of the entire plate was amene flechir forward



The creation of my two stiffeners














I wanted to move another way for a fresh take on the whole












A Indeed I am much further in the construction of terminator

I have 282 photos And I have three months in advance by a report this update
Terminator of the thighs and pelvis are finished

 

It's awesome to see what you've done so far This is gonna look awesome

 

I don't know if this matters but im sure in T2 the fingers had several pistons powering the hand not one.

Very nice work there.

 

Hello AJB2K3

Pardon my English with google

Je te remerci for the interest you door terminator



In order to answer your question, the arms and legs will be articulated as on the photos by "shocks" but to the fingers on the pictures as there as no system fingers do not move

But I verai for they are all articulated

 

awsome plexi work in particular the bending must have been very tricky.

 

hello Kipman725

It is true that the plexiglass and difficult to work but his memory malgrés shape because it comes up under a certain temperature it can keep it beyond here, the plexi is a warm soda is very, very resistance has the arachement I give this board material for your next mod plus it's cheaper than aluminum, I made several tutorial on this material such as glass 3d

http://www.mempa.org/forum/index.php?topic=1893.0







You can see the crane's voulume of T2 on the mod

 

hello

Terminator continuous No problem

 

Excellent

 

I ask for forgiveness you

I do not leave this plan of Mod on "Treminator" on the contrary.
but between " tutos, the reins, and articles " I do not arrive any more has see enough time

I fabricate parrallele there another mod " BIgAir " which is has 95%fini now here is link

http://www.mempa.org/forum/modbigairsuperdeformed-t1891.0.html


I put in you suite to terminator

---------------------------- here is the plan of the thigh has the echelle 1 to have it -------------------






















-------------------- pilage still, and decoupes will have a plate of plexi mecano style - to weld-------










------------------------------------------------------------ SWALLOW interim TIBIA--------------------------------------------------------------------













The cutting up of the knee and the patella, I go to the end of my test and to see if I make a patella or a buffer for the knee

 

----------------------------------------------------- BUT IT IS NECESSARY THAT I MAKE IT--------------




in the openwork parties, reinforcements for avoir the picture of the top
THEREFORE THE WELDING OF PLEXI NOW
I give you the link of the tuto for the welding of the plexi --> http://www.mempa.org/forum/guidesoudage-du-plexi-t2201.0.html



-------------------------------------------------------------------------------------- the muscle to ischio-jambier ------------------------------------------------

They see on the photograph of the building of truth terminator for the film, the muscle ischio-jambier is a raidisseur has the vertical of the plate of face of the thigh


as I is not the possibility to make pieces moulded as it, I am a bit going to cheat, by making a reinforcement weld



Les deux jambes sont la
The tracing in the felt shows modifications