ok my idea is to make a resevior out of plexi. if you dont know what the cs logo is, then dont read this. i would like to make only the man/soldier that is in the logo and have to leads (in, out) coming out of both of his feat. you can insert the liquid from the top of head. so i need to know how to install the leads in his feat.
why does your quote thing say "multimodder" if you dont know how to do the simplest thing? and are you saying you dont know how to make the leds or dont know how to put it in the res. ? p.s. its leds not leads
i need to know where to get the leads to connect the tubing two. also what do i use to install it (paste? idk) (i know plently of electronics its actually building the case that is my problem)
Where do you live? If in the US, try jab-tech.com. Petra's Tech shop (petrastechshop.com I think) might ship internationally, and is very well recommended among certain forums and resellerratings. You're going to need a G1/4 tap and an 11.8mm drill bit, and a tap wrench if you don't have one. If you don't want to go that route, your best alternative bet might be to drill the plastic, epoxy in a short female threaded pipe, and installing the fitting into that.
thank you very much, you dont evan know how much i appriciate this. i will order my materials in a few days.
I recommend you do some additional researching though, since you don't want to spend cash on the wrong size taps, drill bits, fittings, or replacement materials. Not that I doubt my advice, but it's better for you to know for sure what it is you need, rather than going by what I think you might need.
check this page, they have all kinds of barbs. http://www.svc.com/watertubefittings.html these are way sexy. and $2 a piece!
Good luck??? Agreed. Most places have them for $2.50 - strange that they're 20% cheaper here. We still don't know where the OP is ordering from though. US or UK? By the way, it's not nice to hotlink.
What's wrong with good old FrozenCPU quite possibly the best supplied online mod retail shop, in my opinion. They are slightly more expensive than the norm, but in my experience they usually make up for the difference because you'll be able to get everything from one store, in one delivery (which is usually quite fast). direct link to fittings page
Frozen CPU is okay. Jab-Tech has much better customer service in my opinion, and supposedly so does Petra's Tech Shop.
Petra's TS is so friendly, it's kinda scary. I got a free ad pen and a handwritten thank you note for a $10 order. Plus they do regular post shipping. -That's good when you don't want to spend $8 to ship some wire.
