Apresentação do Projecto ModUino = Modding + Arduino This is the case I will modding For some time I've been thinking about mixing the modding with electronica. The initial idea was to change the case with some neons and funs, but now a have a plan for this case ... So I have a lot of ideas to work on this project. Now I've decided I will mix electronica with modding and I want to dedicate at least one hour daily to my project. I promise when I have news I put something new here on this forum. So I need opinions on what I can change to do better. The final objective is to build a case with some electronic, some "servos" to control the opening of the sides, mobo tray ... This case will have a custom backplate to replace de original one. Custom mobo tray Custom Power Supply location and more. Project Status 5%? Updates 2/05/2010 3/05/2010 Let's mod
These fans will have some modification (custom painting and lightening) My 16x2 lcd Here the prototype of fans and temperature controller with a LCD and Arduino (will be used in the project) Here the top of the case already with the cut for the radiator. Needs to be sanded
Hi mate , its great to see more Portuguese at Bit tech , regarding your project ,i know a few things about it , so if you follow your idea this will become a great project !! I will be folowing , good start !
Well, here are the pics of the work today... The blowhole in front plate is almost finished Needs to be sanding The 240mm radiator is almost ready for the paint job (black) the radiator has a leak so I have to fix it The top of the case is ready to receive the radiator... USB's and audio jacks will be install on the top in front of the radiator. The top had a little of rust, so I had to use an abrasive to remove it! I already start to cut the new backplate... The wc block Needs polishing Make your justice