My precioussss.... the blue precious is MINE!
Could you maybe elaborate a little bit? Or maybe point me to some webpage that can?
I have quite a few 8086 and 8088 chips lying around at home and I thought it would be pretty useful if I could actually do something with them....
The way I did mine seems quite easy to me. I, too, recently bought a new soldering iron and the way I tinned it was as follows: Get a piece...
AmPz, it does have to be wireless cause i'd like the network to span from my friends house to mine. so we really can't use cable. i'm liking...
I have been looking at the 802.11 standard but the problem with it is that it's line of sight (as far as I know). RF Serial... that would be...
I need some help from anyone who knows their RF stuff. I'm trying to build a Wireless LAN. The speed of the lan does not have to be fast (I...
yeah, from what i can see. you should be safe. keep me posted
to switch the pc off all you would need (assuming you have a atx machine) is a relay hooked in parallel to your power switch. when the time is...
if that's the code for the cam then it's not enough. you need to open the cam and get the code of the display itself. after a simple google search...
yes, it looks like the ic is just a easy as you think it is. and yes you would connect the serial connections to ground otherwise they might start...
you could run an 8x8 led "matrix" of one port but it circuit gets quite involved (and you'd need new sofware). but it can be done.
Depends on what exactly you want to do with the LEDs and the LCD. If you just want the LEDS to flash based on the signals that your sending to the...
Excellent, no problems. You must live here on the forum cause that was the fast reply I've ever seen :)
If you want the tracks on the bottom only then you should not be able to see any red tracks, your whole pcb should be blue. My guess is that you...
has anyone built on yet and actually got it to work? het me know cause I don't really won't to get an ir module sent all the way from the uk...
thanks, will check it out. Will come in handy now.
I recently download EagleCAD as a result of reading about it in one the elec threads and through their website someone sent in a project they did....
Called my local "have all components" guys and apparently they don't stock the ir module or anything similar which means I screwed. I wish SA...
anyone know how to program for the USB? is there maybe a c/c++ library out there that allows you to send data to the usb? otherwise those...
Separate names with a comma.