Modding cpu to power button

Discussion in 'Modding' started by digitalattrition, 5 Jan 2004.

  1. digitalattrition

    digitalattrition What's a Dremel?

    Joined:
    5 Jan 2004
    Posts:
    12
    Likes Received:
    0
    is there any way to mount a dilapidated CPU on the outside of the case to become the power button?? it seems like a good idea...
     
    digitalattrition, 5 Jan 2004
    #1
  2. The_Sub

    The_Sub What's a Dremel?

    Joined:
    16 Nov 2003
    Posts:
    281
    Likes Received:
    1
    Use a hot glue gun and put a dab on the cpu then place it on the switch. It'll be raised quite a bit from the normal switch but would work.
     
    The_Sub, 5 Jan 2004
    #2
  3. metarinka

    metarinka What's a Dremel?

    Joined:
    9 Feb 2003
    Posts:
    1,844
    Likes Received:
    3
    like he said, it would be as simple as mounting the old cpu to the switch.
     
    metarinka, 5 Jan 2004
    #3
  4. digitalattrition

    digitalattrition What's a Dremel?

    Joined:
    5 Jan 2004
    Posts:
    12
    Likes Received:
    0
    my power switch is sunk into the case a bit and there is a bit of plastic surrounding it. i suppose i could sand it down flush with the power button or cut some material out and then attach the cpu?
     
    digitalattrition, 5 Jan 2004
    #4

Share This Page