Case Mod - In Progress SpeakeR Project [By Lawnmower]

Discussion in 'Project Logs' started by Lawnmower, 17 Feb 2008.

  1. Lawnmower

    Lawnmower What's a Dremel?

    Joined:
    2 Nov 2007
    Posts:
    2
    Likes Received:
    0
    [Hi everybody,
    for the everybody that doesn't know me, I’m Henry (in english) and i’m fourteen, the project which I wanted to risk, as the name says the name, is the realization of an acoustic box inside which I will put the hardware of my pc from scratch ……….
    …….. after almost one month of "ideation", I have begun to try to give form and measures to this "case" that will take then the name (thanks to the help of wolf) of SpeakeR Project.
    At this point I didn't have to do anything else other than to pass to the real thing…….. but before beginning, I have decided to consult some people really kind and cordial and above all with a lot of experience that is: Lupo, Rigor, e _FAX_..........

    Talk to you soon with the first updates!!!



    Therefore, for first thing I had to make sure about count me some approximate encumbrances of the hw and, appraise the possible positions………after some study (really few) here is thing has come out!!!
    [​IMG]

    afterwitch, takings some measures, have marked the compensated by to cut…..
    [​IMG]

    and I have made a further test before beginning to cut…
    [​IMG]

    considering that it was all well, I have performed the cut……(don’t have the photos of the workmanship in how much the photo camera had a bead battery…)
    [​IMG]

    It’s time to cut the panels and to see the real dimension of this box!!!
    [​IMG]

    Here it is with the hw supported inside……..
    [​IMG]

    and here are the walls of the houses to glue………
    [​IMG]

    (you excuse for the photo un focused….)
    [​IMG]
     
  2. Lawnmower

    Lawnmower What's a Dremel?

    Joined:
    2 Nov 2007
    Posts:
    2
    Likes Received:
    0
    Only that i have not found the screws that I looked for, therefore, I will use the nails to finish the fixing of the panels, thing that will do when the glue has ended to dry……. even now that it is not; totally dry it has a lot of resistance!!!!
    Boys, I have not found the screws that I was looking for, therefore the only solution were the nails……….. let's put them in!!!!
    [​IMG]

    particular nail….
    [​IMG]

    here is how the nail remains………
    [​IMG]

    once I put in all the nails, I have could not resist…….. I have taken its levels and I have given one measure to the bench…….. then the case……. as you see everything is perfect!!!!!, above all if we think that the angles must be smoothed… still…
    [​IMG]

    particular of the bead
    [​IMG]

    Here the beast used for eliminating the big one….. as you will notice it warts with compressed air…..
    [​IMG]

    particular of the disk…..
    [​IMG]

    photo of the workmanship
    [​IMG]


    written by Lawnmower; translated by Toby
    stay duned!
     
  3. bentleya

    bentleya Lian Li Snail :)

    Joined:
    2 Feb 2008
    Posts:
    587
    Likes Received:
    7
    nice work :thumb::thumb:

    the last work should be spelt tuned not duned :thumb:
     
  4. C:\Joshy

    C:\Joshy How much cake can you eat in a min?

    Joined:
    30 Aug 2007
    Posts:
    67
    Likes Received:
    0
    looking good so far:)

    i agree but i think you meen the last word....

    useless aint we .
    anyway good work :rock:
     
  5. bentleya

    bentleya Lian Li Snail :)

    Joined:
    2 Feb 2008
    Posts:
    587
    Likes Received:
    7
    yer i ment that:duh::duh:
     
Tags:

Share This Page