Found the issue in the end, pcie change, I.e the new card nudged the BIOS into a 'fresh' start, and it doesn't default to a display port output....
Just realised how dead this forum really is - any chance of a mod moving to tech support? Thanks
Yeah this is all with the M.2 card removed now, apologies missed that detail! It was in the 2nd lit x16 slot, x16_3
Seemed to be the done thing to post troubleshooting here so I went for it :p Hyper M.2 card does support raid and might be its main purpose even...
Have an issue with a strix x99 that has been working fine for months, tried to add a hyper.m2 x16 card to it and only one nvme ssd was recognised,...
Was a bit odd but we all know how many bizarre issues can be solved by reseating cards and poor connections. Knowing it was an ssd issue I should...
Well, finally tracked down the issue with this, after giving up on SLI and swapping out the triple 970 setup for a 1080 ti due to the lack of...
Options are Launch CSM >AUTO >enabled >disabled Boot device control >uefi and legacy oprom >legacy oprom only >uefi only Boot from storage...
Definitely tried that at one point too along with CSM off
1 2 and 4 x16 slots as per manual. They're also conveniently lit so it's hard to get it wrong (once you realise you've put the cards in with your...
Being entirely separate controllers (there are only 36 lanes available to pci due to nvme using the other 4) I can't see how that would be the...
No such switch on the strix, and it's quite happily lighting up all 3 slots to point out where to fit the cards so I can't imagine that's the...
Not particularly helpful no, well aware of the limitations of triple sli and with it looking to be phased out with the minimal 1000 series support...
Hi, Have a bit of an odd issue with NVMe and SLI. Hardware is: Asus X99 strix Intel i7 5930K Samsung 950 Pro nvme M2 ssd 3x Gtx970 Asus strix oc...
Separate names with a comma.
