i seem to of hit a bit of a wall and need some advice! i have a LGA 3.0 p4 chip which i can get to 3.6 semi stable. by this mean i can get it to stay on but it cant last more than 30mins on a prime test. this resulted in me lowering the clock slightly to 239mhz so i have a cpu freq of 3585mhz i dont know what to try next to get it to stable out, i have my vcore at 1.7125v which is board max (should i update the bios) ddr2 at 2.10v and my northbridge at 1.85 i have it all mounted on an abit AA8 3rd eye motherboard. all of it is cooled by a 1/2 danger den tdx setup (northbridge is on a z chip) so cooling isnt a problem. wasn't to sure weather my memory is holding me back i have samsung ddr2 pc3200 (200mhz) i took this from cpz: you can see my memory timings as well, which i havent altered. im a bit of a noob with the ddr2/lga setups when it comes to overclcoking, so could do with a few pointers to take it a bit further if i could. thanks!
