There are two shops here in Hengelo which sell Allen bolts (or inbus in dutch). They are local metalware shops. Regular DIY shops don't sell them normally, you would really have to find a specialised metalware shop.
Some days ago I've been working on the mounting of the Mach2. Here's the pics. Two aluminium bars which are mounted to the compressor fit exactly between the bottom framing of the case. Also the radiator is mounted this way. I made a mounting plate for the controller circuit board, it will be mounted to the back framing of the case, above the radiator. Made a hole for the bottom intake fan. Shot from the bottom. The fan fits nicely next to the compressor. Shot with fangrill. The grill will be replaced by a black version later (wiregrills own ) By the way it is a 120mm fan, 4cm high. Unfortunately I busted the connector so I'm forced to use another fan (can't fix the connector, nor replace it; only option is to solder it but I don't have a decent soldering station). » Discuss
Project: Nimex is currently on hold due to financial and other reasons. I have decided to drop the phasechange cooling due to having 3 cpu's with a coldbug and one dead motherboard. Also I'm not satisfied with the build quality and therefore I will be starting all over again (yes, for the second time..), this will be sometime after summer, but I don't have any specific plans yet. I decided to stop Nimex only two weeks before the dutch casemodding championships pre-selection. Since then I have been working on Project Gemini to still be competing in the championships. The championships are now over, I got through to the finals and finished 9th. Probably the next project won't be Nimex again either. I have plans with CoolerMaster to mod a Centurion 5 with Aquagate and other CM components as a CoolerMaster demopc (for CeBIT 2007 etc). As for Nimex, I hope to have it finished before CeBIT 2007 (yes, it was on display at CeBIT 2006 as well, but it was very, very far from finished).
