Well it was a school project for a week, a got a b+ on it But I must continue the rest of the work at home
Update 08.08 Finaly got some paint on the doors Here you can see the finish, but I don't know what you call this white color in english I'll just glue the acryl in plate and atach some bolts for the look Got som filler, this filler is great, real easy to get smooth! Finaly got the right chuck for my engraving bits Then it's time to get ridd of the scratches. Damn, the filler leaves lots of dust Time to put on the mask with the dust filter^^ Had to mounth the front and top to find out how to place the 5,25" rack I used silicon to glue it together I think I shhoul clean the workshop more often
Update 10.08 The way the 5,25" rack eded up like From the top, I'll drill right throught the top and to the rack and insert some bolts. Looks like it got too wide, I think have to make it smaller And this stupid edge made the rack go to long from the MOBO board Damn, looks liek I have to make some adjustments to fit the ..... on the bolts That Edge gonna go! The PSU Custom PSU. :love: :love: :dontgetit: The bracket to the CPU fan Looks like it needs some paint^^ Had to paint the bolt too. And this engraved logo have to go. Gone Made the holes for the fans Looks much better with bolts than rivets. I'll take the to holes remaining later. And I'm gonna use something like this to hold the rubber-rings for the HDDs
looks good! by looking at your case mod i can get many ideas for my casemods too! i have one suggestion to make... if you allow me. put a small led verticaly like this: Code: _____ | U | <-- led! | | | | <-- plexi face | | | | . . . . i think that way it will do weird soft lighting all over the face!
very cool mod will be watching this one develops must be nice to have most of the tools u need for the work at hand with luck I should be getting myself either a band saw or a scroll saw still cant work out which will be the more useful anyway nice work so far look forward to next update.
Yeah, I'll post an update within 5 minutes Thanks m8. It's realy nice to have almost every tool you need within reach. I think you wil have most use for the bandsaw Update in 5 min as i quote the last post
Update 04.11 I've almost done painting the frame, only need to sand it a bit and get some paint over this primer. What do you think about the bracket for the CPU fan?
Update 10.12 Now it's just the final layer of paint and clear coat remaining. As you might see the paint is a bit coarse. I've bought some mesh with real small holes. I'm hoping it would look good togetter with the UV reactive acryl in the front. And 3 set's of cathodes came from 3dfxcool.no I love sponsor gifts Remainings - Last coat with paint and clear coat. - A hole for the CD. - Putt it togetter. - Some cable extending and sleeving..
Thanks, well I'm working on that part. I'll sand the paint before laying on the final layer of paint. I'll try.