Case Mod - In Progress [MOD]--=TERMINATOR=---Endoskeleton-100%HM

cool http://www.pcinpact.com/forum/index.php?showtopic=108520&st=0

 

wow i dont think i have seen work like that ever... keep up the great work

 

robot-head - Morgui

 

hello



you have it site or the bond DireSnake

 

very very very nice acrylic work!!! keep it up!!!!

 

hello

fixing of the jaw





----------------------------------the cranium opens----------------------------------







ears


hot foldingFirst once
second once




both suppors for the HP veiled
the mastiquage


------------------------the cranium do not like to me

it will be in one alone part







-------------------------------------------------------------test of engraving and painting--------------------------------







The eyes are not made yet


------------------------------------------------------THAT IS ONLY ONE BEGINNING---------------------------------

 

that is f'ing awesome, are you gonna make the whole terminator? or just the upper half maybe? even that is a ton of work it would be awesome if the head can turn side to side a little... maybe hook up a motor and have it move a little once every minute or two! that should scare the **** out of people nicely the sound of the motor operating would be realistic aswell again, this is looking f'ing awesome, f@$k yeah!!!!!

 

awesome mod great work!
a webcam as one of the eyes?

 

hello



yes terminator will be has scale 1 (on foot as well as the arms) I consider the engine in the head, for the Web cam in the eye, I do not know yet, because “VIRUS” had it already

VIRUS------>http://forums.bit-tech.net/showthread.php?t=111574&highlight=VIRUS+MOD






I have had to already begin terminator for 3 months, in this moment I am building the legs

 

Great! Pls, make those eyes soon!!!

 

No need to mention my opinion on the idea for this project....
But there is no way I can desregard the craftsmanship put in to it! NICE work!

 

i had an idea for how to control the head, maybe you like it?

the head would need to be able to pivot a little to each side, and a wheel or crank would need to be attached to the head via a shaft. This crank would need to be linked to a wheel, which is driven from a small dc motor - a small reduction gearbox would best be used to increase the torque & create a slow yet strong movement of the head. This way, a motor that spins in one direction only, provides left & right movement. It wont move to exact measurements, but that's great for a seemingly random effect, to give T2 a bit of personality!

All we need is a little circuit to drive our motor, it just has to give the motor a pulse of power for say 1 second? which we can adjust of course, trial & error will find a nice setting, and the circuit needs to give this powerpulse after a set time, say once every minute or two or whatever, adjusting the frequency of the circuit using a small pot/variable resistor would control how long each pause between movements is. First the head would move a little to the right, pause, then back again, pause, then left... etc... long motor drive times mean the head wil go middle-left-middle-right, shorter drive times can mean movements as small as 10 degrees or whatever you want!

A longer crank shortens how far left & right the head will go, same for using a smaller output wheel - less movement, and vice-versa of course. The diameter of the wheel MUST be SMALLER than the crank... i'm probably stating the obvious here I've given approximate dimensions with the GREY lines, of how far the head would move, using a crank length and wheel diameter ratios, as suggested in the pic.



I bet you could make this all nice and shiny to blend in with T2's mechanical body! the noise of the motor should be very cool & realistic!! CPEMMA will be able to draw up the required 555 circuit in a flash! hope youlike my idea

 

hello

thank you to you mvagusta, excellent idea has. will make his motorization on the level of the vertebrae

I present the pin of closing to you with more engravings

the second pin which makes

 

awesome. The small 555 timing circuit with a transistor to drive the motor will be cheap & easy to make, we can get cpemma to draw it up otherwise i'm gonna have to crack open a textbook The small gearbox with motor shoudl be available at most r/c model stores, something such as these
i'm glad i could help!

edit: another thing you could do is have a switch to decide between 555-circuit-control or pc control
sooo many options for pc control, i dunno exactly how to trigger high/5v & low/0v outputs on things like usb or parrallel port but im sure many guys here know exactly how to do that! these 5v/0v outputs can be used to trigger the same transistor the 555 ciruit controls - the switch can decide wether the pc controls the transistor or the 555 circuit drives it... u know, maybe you wanna put a high torque motor in each shoulder.... and in each elbow.... solenoid for each finger.... it's alot of work but hey... that would be one hell of a result!

 

hello



HERE THE MAGNIFYING GLASS OF THE CLOCK AND WATCH MAKER







size of the nose

Still deeper


:up:


But that is not finished

 

looks like you stole the real thing

 

an update

small jacks

Small tubes in aluminum
A filtée stem and two springs of pen

brace





I add this spring inside cranium and makes reassemble the jaw

--------------------------A small coat of PROVISIONAL white paint on the teeth --------------------------------








I make a spinal column in one only part,terminator will be on foot like this one

 

this is one insane project. will be looking forward to all progess

 

true, huge potential here, looking very excellent so far!

 

Anyone know why a terminator needs false teeth?

Incredible work as always, this thing scares me. Its the sort of thing I'd expect to strangle me in my bed one night during a hostile alien invasion.