Hello I would like to introduce you my Case-Con! created from mdf/wood, equipped with new innovative ideas --------------------------------------------------------------- about me: - I am wolfgang - 28 years from Graz / Austria / Europe / World - 2 children: 2.5 years son / daughter 0.5 years - Nick: "caseArt" -> mod = art - I create some mods in Austria - My case was in a gaming magazine - 2005 .. on the cebit (ECG) etc. - I never use 3d models. I want to inspire people with HANDMADE and "WHAT" NEW! --------------------------------------------------------------- the case: to my plan: >>>>>>>>>>>>>>>>>>>>>> "TADAAAAAAAAAA" I give my case the name: >>>>>>>>>>>>>>>>>>>>>> "FIRE & EARTH"! paint bla / bla ... 1.) in the upper area, I create a "plant - areal" YES for ordinary plants (like flowers...)! 2.) on the open (left) side, I will mount between 2 fire-resistant safety glass -> 3x an oil lamp! I would like to show you a lamp, that you can take a picture! --------------------------------------------------------------- Hardware: i will update later.... --------------------------------------------------------------- > please < excuse my bad English! write slow and loud --------------------------------------------------------------- a special thanks to: powered by Noctua: www.noctua.at start with my logo "CA" a piece of aluminum taped logo painted proxon out... and action! after sawing grind key file
oh sorry, here they are --------------------------------------------------------------- then continues with the logo (ca): to brush the aluminum, I need a sanding block + implementation shear + 320 sandpaper The finished sanding block from the side I have quickly finalized the implementation I stuck my logo with double-sided tape brushing from the top action! ready
to the case: material: connecting plates, drilling holes ... screw together... connected... (the upper part) The screws were sunk to trowel it completely assembled ... view from above 1.)# Live modding: you need more pictures? please ask for it mfg caseArt
Welcome to Bittech and great start on your mod. The logo turned out really nice. I can't wait to see how your mod will turn out.
@ shakka65: thank you my little daughter: 6 months old! [/ B] <3 I bought 2 spruce afford 20x20x2000 (mm). This had to be cut to length, I use my jigsaw with a selfmade SAW TABLE (+ ROLL TABLE) material: hinges, wood usw... I screwed the hinges to the board (must be very accurate) the roll table ready Now I had to customize the jigsaw fits!, almost 4 holes in the sleigh, i attached the jigsaw with the table cut to length, finished, works perfectly ok, it is very sick but it works! (my circular saw is broken )
spruce afford're done, screw it now proforma arranged (not ready) I marked where I will attach the mounting angle clamped a aluminum sawblade and I cut out of alu-profiles the mounting angles finished i had to dowel 6mm dowel pins, drill, etc... ready! uuuf,... it fits back to the mounting angles, marked, and also just drilled! assembling... i assembled the afford in a ditstance of 7mm Alright fits: D image from the front from the side puh,... I hope you like it
to my plan: >>>>>>>>>>>>>>>>>>>>>> "TADAAAAAAAAAA" I give my case the name: >>>>>>>>>>>>>>>>>>>>>> "FIRE & EARTH"! paint bla / bla ... 1.) in the upper area, I create a "plants - areal" YES for ordinary plants (like flowers...)! 2.) on the open (left) side, I will mount between 2 fire-resistant safety glass -> 3x an oil lamp! I would like to show you a lamp, that you can take a picture!
Computers and fire is cool, but I'm a bit worried of wood and fire.. Good work there, but seriously I'll have my doubts about the fire until I see you pull it off without burning your house down
@ the_beast: yes !!!! fire @ jipa: thanks, i hope i dont look like him: http://boba.files.wordpress.com/2008/09/burning_man.jpg I think I will use "bio-ethanol", lamp oil is a "dirty" solution (soot development) My experiences: FUEL PASTE: - Not realy for inside using - Smells... - Ugly "flare" + Flexible + Cheap + Can be ignited from the cup dirket Lamp Oil: - Smells - Smokes - soot... - Insecure + Cheap + Long burns + Everybody knows fondue, etc. .. + nice flame therefore I will use bioethanol: Bio Ethanol: + Best visual flare + Safe + No smell + No soot + Flame burns at the surface, you can designed the "fire" as you want - 1L burns approximately 3 hours
i fight against the flu, the last 2 weeks! atm i testing: the flame, the quantity, and heat now i use ethanol, so I try a bit around! in my "old" oil lamp ethanol dont burn! so I can forget this variant! ethanol in a stainless steel cup! 1, 2, 3, .... FIRE !!!!!! I think it is a very nice flame, burns great, does not stink, but the heat makes me ! The cup is in the height of the flame, warm (NOT HOT), in the lower range (under the flare line) cold! Now I will have a "problem" with my case design! hmmmm..... I will build me a stainless steel container lg caseart
