Hey guys, i literally started F@H last week sometime. Im currently participating using my normal home PC (Every little helps right?) and im wanting to know how to get the most out of my PC at night when i dont use it. Ive heard about running 4 clients (one for each of my CPU cores, i run Phenom II X4 955 BTW) but cant seem to get it to work correctly. Im also running the GPU client for my 5770 and wondered if there is anything i can do to get more out of this?? Oh and i added a PhysX Dedicated card (8800GS) the other day and im wondering if i can use this and how? Remember im a complete noob and some of the tuts i have seen are a little bit complicated for me as they are written by experienced folders in a way that semi-experienced would understand but not a complete noob My folding.extremeoverclocking.com stats Cheers in advanced guys <3
Rather than trying to run 4 CPU clients you should consider the latest SMP client (6.3) available to download from the Stanford HP client page. http://folding.stanford.edu/English/DownloadWinOther It is a lot easier to set up in its latest incarnation and will use all the cores available to it. Even if you only run your computer over night it should make the deadlines no problem but if you are able to run 24/7 the bonus points will stack up even more. I would try not to be too ambitious to start off with. Make sure you read all the documentation and WIKIs available on the FAH site and have a look at the forums. Get one client going well before you move onto the next. Having done that, if you are still unable to get something to work, post the specific problem with a copy of the log file and I'm sure you will receive all the help you need. Good luck!
Welcome to the team. I'd say smp for the cpu & the gpu client on the 5770 (& 8800GS eventually). I'd advise to set the SMP client up first then we can help you with the gpu clients (multi-gpu is fairly easy but as you're mixing ATi & Nvidia it could be a tad more tricky)
kk guys - as long as the SMP client is as easy or not much harder to setup i shouldnt have a problem, i got the single CPU client working pretty easily. Ill post my progress Cheers so far. EDIT: Is it the client at the bottom of the list (Windows: V6 Beta SMP2/CPU clients) the top ones are GPU clients. just wanna check im not making a noob mistake
Ok worked it out - Installed, added to FAHMON, how do i know if its running correctly?? It doesnt seem to be doing anything in FahMon :/ [EDIT] Nevermind its just hit 1%, however its got a yellow flag instead of green, and it wont show the ETA any ideas?
It's probably not showing an ETA because it needs more than 1% of the WU to be finished before it can calculate the ETA. Give it a few more minutes - if necessary you can force FahMon to manually refresh using F6.
It needs to complete 3% to show anything, however FahMon will report a low ppd as it cannot show the bonus that you should be getting, you should use HFM.NET see this thread. http://forums.bit-tech.net/showthread.php?t=181726. Also have you registered for a passkey, without this you will not get any bonus. http://folding.stanford.edu/English/FAQ-passkey
FahMon bases it's calcs typcially on three frames, so tends to be yellow until you hit 4%. Note: FahMon has not been updated in recent times, so you'd be better off running HFM (see HFM.net) which recognises the new cores, bonuses etc, and also has a FahMon look and feel.
woop, im an inpatient little **** Next Question. Low cost - No cost heat reduction lol im sweating. My PC has turned into a radiator :O Im thinking about adding a couple more fans and lapping the CPU. [EDIT]: just seen 2 new replies, Yea i got a passkey before i began folding and ill look at HFM now
Well im glad im using the SMP client now - MY CPU PPD has jumped by about 4500 points lmao xD not a lot compared to some of you addicts, but it seems it to me Im gonna have to get a desk fan now!! BTW when i start gaming, F@H only uses AVALIABLE resources to fold doesnt it?? so it technically shouldnt affect me?? KK next is improving my GPU if its possible (and getting my 8800GS working). How? It cant be that simple since its an ATi and a nVidia card in the same system. So is it the same principle as CPU, different client etc? or more complicated? :/
It should but I'd stop gpu folding before gaming as it will effect frame rates. For multiple gpu folding try this guide (I know it works as I wrote part of it) http://www.bit-tech.net/bits/software/2009/06/17/how-to-set-up-folding-home/4
yea thats straight forward enough - but is there anything special i need to do since one GPU is ATi and the other is nVidia???
I'd say give it a go and see, it's a bit of unexplored territory as most of us folders just use nvidia cards as they produce more ppd
I cant even get one to work now [EDIT] NVM fixed [EDIT2] I think i have them both working - was easier than expected, ill give it 10 mins and see what happens [EDIT3] Code: --- Opening Log file [August 19 17:50:58 UTC] # Windows GPU Console Edition ################################################# ############################################################################### Folding@Home Client Version 6.23 http://folding.stanford.edu ############################################################################### ############################################################################### Launch directory: C:\Users\DJRenegade\AppData\Roaming\Folding@home-gpu nVidia Arguments: -gpu 1 -forcegpu nvidia_g80 -verbosity 9 -local -gpu 1 -forcegpu nvidia_g80 -verbosity 9 -local [17:50:58] - Ask before connecting: No [17:50:58] - User name: DJRenegade (Team 35947) [17:50:58] - User ID: 592C812F2460337E [17:50:58] - Machine ID: 3 [17:50:58] [17:50:58] Loaded queue successfully. [17:50:58] Initialization complete [17:50:58] - Preparing to get new work unit... [17:50:58] + Attempting to get work packet [17:50:58] - Will indicate memory of 2047 MB [17:50:58] - Detect CPU. Vendor: AuthenticAMD, Family: 15, Model: 4, Stepping: 2 [17:50:58] - Connecting to assignment server [17:50:58] Connecting to http://assign-GPU.stanford.edu:8080/ [17:50:58] - Autosending finished units... [August 19 17:50:58 UTC] [17:50:58] Trying to send all finished work units [17:50:58] + No unsent completed units remaining. [17:50:58] - Autosend completed [17:50:59] Posted data. [17:50:59] Initial: 40AB; - Successful: assigned to (171.64.65.61). [17:50:59] + News From Folding@Home: Welcome to Folding@Home [17:50:59] Loaded queue successfully. [17:50:59] Connecting to http://171.64.65.61:8080/ [17:51:01] Posted data. [17:51:01] Initial: 0000; - Receiving payload (expected size: 74236) [17:51:01] Conversation time very short, giving reduced weight in bandwidth avg [17:51:01] - Downloaded at ~144 kB/s [17:51:01] - Averaged speed for that direction ~145 kB/s [17:51:01] + Received work. [17:51:01] + Closed connections [17:51:01] [17:51:01] + Processing work unit [17:51:01] Core required: FahCore_11.exe [17:51:01] Core found. [17:51:01] Working on queue slot 06 [August 19 17:51:01 UTC] [17:51:01] + Working ... [17:51:01] - Calling '.\FahCore_11.exe -dir work/ -suffix 06 -priority 96 -nocpulock -checkpoint 15 -verbose -lifeline 2708 -version 623' [17:51:01] [17:51:01] *------------------------------* [17:51:01] Folding@Home GPU Core [17:51:01] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009) [17:51:01] [17:51:01] Compiler : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86 [17:51:01] Build host: amoeba [17:51:01] Board Type: Nvidia [17:51:01] Core : [17:51:01] Preparing to commence simulation [17:51:01] - Looking at optimizations... [17:51:01] DeleteFrameFiles: successfully deleted file=work/wudata_06.ckp [17:51:01] - Created dyn [17:51:01] - Files status OK [17:51:01] - Expanded 73724 -> 383588 (decompressed 520.3 percent) [17:51:01] Called DecompressByteArray: compressed_data_size=73724 data_size=383588, decompressed_data_size=383588 diff=0 [17:51:01] - Digital signature verified [17:51:01] [17:51:01] Project: 6600 (Run 3, Clone 704, Gen 78) [17:51:01] [17:51:02] Assembly optimizations on if available. [17:51:02] Entering M.D. [17:51:07] Tpr hash work/wudata_06.tpr: 3258486040 3492403057 28375028 565213947 2567594582 [17:51:07] [17:51:07] Calling fah_main args: 14 usage=100 [17:51:07] [17:51:08] mdrun_gpu returned [17:51:08] Going to send back what have done -- stepsTotalG=0 [17:51:08] Work fraction=0.0000 steps=0. [17:51:12] logfile size=0 infoLength=0 edr=0 trr=25 [17:51:12] + Opened results file [17:51:12] - Writing 637 bytes of core data to disk... [17:51:12] Done: 125 -> 124 (compressed to 99.2 percent) [17:51:12] ... Done. [17:51:12] DeleteFrameFiles: successfully deleted file=work/wudata_06.ckp [17:51:12] [17:51:12] Folding@home Core Shutdown: UNSTABLE_MACHINE [17:51:16] CoreStatus = 7A (122) [17:51:16] Sending work to server [17:51:16] Project: 6600 (Run 3, Clone 704, Gen 78) [17:51:16] - Read packet limit of 540015616... Set to 524286976. [17:51:16] + Attempting to send results [August 19 17:51:16 UTC] [17:51:16] - Reading file work/wuresults_06.dat from core [17:51:16] (Read 636 bytes from disk) [17:51:16] Connecting to http://171.64.65.61:8080/ [17:51:16] Posted data. [17:51:16] Initial: 0000; Conversation time very short, giving reduced weight in bandwidth avg [17:51:16] - Uploaded at ~3 kB/s [17:51:16] - Averaged speed for that direction ~1 kB/s [17:51:16] + Results successfully sent [17:51:16] Thank you for your contribution to Folding@Home. [17:51:20] Trying to send all finished work units [17:51:20] + No unsent completed units remaining. [17:51:20] - Preparing to get new work unit... [17:51:20] + Attempting to get work packet [17:51:20] - Will indicate memory of 2047 MB [17:51:20] - Connecting to assignment server [17:51:20] Connecting to http://assign-GPU.stanford.edu:8080/ [17:51:21] Posted data. [17:51:21] Initial: 40AB; - Successful: assigned to (171.64.65.61). [17:51:21] + News From Folding@Home: Welcome to Folding@Home [17:51:21] Loaded queue successfully. [17:51:21] Connecting to http://171.64.65.61:8080/ [17:51:23] Posted data. [17:51:23] Initial: 0000; - Receiving payload (expected size: 74437) [17:51:23] Conversation time very short, giving reduced weight in bandwidth avg [17:51:23] - Downloaded at ~145 kB/s [17:51:23] - Averaged speed for that direction ~145 kB/s [17:51:23] + Received work. [17:51:23] Trying to send all finished work units [17:51:23] + No unsent completed units remaining. [17:51:23] + Closed connections [17:51:28] [17:51:28] + Processing work unit [17:51:28] Core required: FahCore_11.exe [17:51:28] Core found. [17:51:28] Working on queue slot 07 [August 19 17:51:28 UTC] [17:51:28] + Working ... [17:51:28] - Calling '.\FahCore_11.exe -dir work/ -suffix 07 -priority 96 -nocpulock -checkpoint 15 -verbose -lifeline 2708 -version 623' [17:51:28] [17:51:28] *------------------------------* [17:51:28] Folding@Home GPU Core [17:51:28] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009) [17:51:28] [17:51:28] Compiler : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86 [17:51:28] Build host: amoeba [17:51:28] Board Type: Nvidia [17:51:28] Core : [17:51:28] Preparing to commence simulation [17:51:28] - Looking at optimizations... [17:51:28] DeleteFrameFiles: successfully deleted file=work/wudata_07.ckp [17:51:28] - Created dyn [17:51:28] - Files status OK [17:51:28] - Expanded 73925 -> 383588 (decompressed 518.8 percent) [17:51:28] Called DecompressByteArray: compressed_data_size=73925 data_size=383588, decompressed_data_size=383588 diff=0 [17:51:28] - Digital signature verified [17:51:28] [17:51:28] Project: 6605 (Run 5, Clone 378, Gen 258) [17:51:28] [17:51:28] Assembly optimizations on if available. [17:51:28] Entering M.D. [17:51:34] Tpr hash work/wudata_07.tpr: 899674122 1294743821 2557774931 2187199685 3387510897 [17:51:34] [17:51:34] Calling fah_main args: 14 usage=100 [17:51:34] [17:51:34] mdrun_gpu returned [17:51:34] Going to send back what have done -- stepsTotalG=0 [17:51:34] Work fraction=0.0000 steps=0. [17:51:38] logfile size=0 infoLength=0 edr=0 trr=25 [17:51:38] + Opened results file [17:51:38] - Writing 637 bytes of core data to disk... [17:51:38] Done: 125 -> 124 (compressed to 99.2 percent) [17:51:38] ... Done. [17:51:38] DeleteFrameFiles: successfully deleted file=work/wudata_07.ckp [17:51:38] [17:51:38] Folding@home Core Shutdown: UNSTABLE_MACHINE [17:51:42] CoreStatus = 7A (122) [17:51:42] Sending work to server [17:51:42] Project: 6605 (Run 5, Clone 378, Gen 258) [17:51:42] - Read packet limit of 540015616... Set to 524286976. [17:51:42] + Attempting to send results [August 19 17:51:42 UTC] [17:51:42] - Reading file work/wuresults_07.dat from core [17:51:42] (Read 636 bytes from disk) [17:51:42] Connecting to http://171.64.65.61:8080/ [17:51:43] Posted data. [17:51:43] Initial: 0000; - Uploaded at ~1 kB/s [17:51:43] - Averaged speed for that direction ~1 kB/s [17:51:43] + Results successfully sent [17:51:43] Thank you for your contribution to Folding@Home. [17:51:47] Trying to send all finished work units [17:51:47] + No unsent completed units remaining. [17:51:47] - Preparing to get new work unit... [17:51:47] + Attempting to get work packet [17:51:47] - Will indicate memory of 2047 MB [17:51:47] - Connecting to assignment server [17:51:47] Connecting to http://assign-GPU.stanford.edu:8080/ [17:51:48] Posted data. [17:51:48] Initial: 40AB; - Successful: assigned to (171.64.65.61). [17:51:48] + News From Folding@Home: Welcome to Folding@Home [17:51:48] Loaded queue successfully. [17:51:48] Connecting to http://171.64.65.61:8080/ [17:51:50] Posted data. [17:51:50] Initial: 0000; - Receiving payload (expected size: 74333) [17:51:50] Conversation time very short, giving reduced weight in bandwidth avg [17:51:50] - Downloaded at ~145 kB/s [17:51:50] - Averaged speed for that direction ~145 kB/s [17:51:50] + Received work. [17:51:50] Trying to send all finished work units [17:51:50] + No unsent completed units remaining. [17:51:50] + Closed connections [17:51:55] [17:51:55] + Processing work unit [17:51:55] Core required: FahCore_11.exe [17:51:55] Core found. [17:51:55] Working on queue slot 08 [August 19 17:51:55 UTC] [17:51:55] + Working ... [17:51:55] - Calling '.\FahCore_11.exe -dir work/ -suffix 08 -priority 96 -nocpulock -checkpoint 15 -verbose -lifeline 2708 -version 623' [17:51:55] [17:51:55] *------------------------------* [17:51:55] Folding@Home GPU Core [17:51:55] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009) [17:51:55] [17:51:55] Compiler : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86 [17:51:55] Build host: amoeba [17:51:55] Board Type: Nvidia [17:51:55] Core : [17:51:55] Preparing to commence simulation [17:51:55] - Looking at optimizations... [17:51:55] DeleteFrameFiles: successfully deleted file=work/wudata_08.ckp [17:51:55] - Created dyn [17:51:55] - Files status OK [17:51:55] - Expanded 73821 -> 383588 (decompressed 519.6 percent) [17:51:55] Called DecompressByteArray: compressed_data_size=73821 data_size=383588, decompressed_data_size=383588 diff=0 [17:51:56] - Digital signature verified [17:51:56] [17:51:56] Project: 6600 (Run 4, Clone 228, Gen 73) [17:51:56] [17:51:56] Assembly optimizations on if available. [17:51:56] Entering M.D. [17:52:01] Tpr hash work/wudata_08.tpr: 1673305920 2275490131 2024663651 811250334 518976786 [17:52:01] [17:52:01] Calling fah_main args: 14 usage=100 [17:52:01] [17:52:02] mdrun_gpu returned [17:52:02] Going to send back what have done -- stepsTotalG=0 [17:52:02] Work fraction=0.0000 steps=0. [17:52:05] logfile size=0 infoLength=0 edr=0 trr=25 [17:52:05] + Opened results file [17:52:05] - Writing 637 bytes of core data to disk... [17:52:05] Done: 125 -> 124 (compressed to 99.2 percent) [17:52:05] ... Done. [17:52:05] DeleteFrameFiles: successfully deleted file=work/wudata_08.ckp [17:52:06] [17:52:06] Folding@home Core Shutdown: UNSTABLE_MACHINE [17:52:10] CoreStatus = 7A (122) [17:52:10] Sending work to server [17:52:10] Project: 6600 (Run 4, Clone 228, Gen 73) [17:52:10] - Read packet limit of 540015616... Set to 524286976. [17:52:10] + Attempting to send results [August 19 17:52:10 UTC] [17:52:10] - Reading file work/wuresults_08.dat from core [17:52:10] (Read 636 bytes from disk) [17:52:10] Connecting to http://171.64.65.61:8080/ [17:52:10] Posted data. [17:52:10] Initial: 0000; Conversation time very short, giving reduced weight in bandwidth avg [17:52:10] - Uploaded at ~3 kB/s [17:52:10] - Averaged speed for that direction ~2 kB/s [17:52:10] + Results successfully sent [17:52:10] Thank you for your contribution to Folding@Home. [17:52:14] Trying to send all finished work units [17:52:14] + No unsent completed units remaining. [17:52:14] - Preparing to get new work unit... [17:52:14] + Attempting to get work packet [17:52:14] - Will indicate memory of 2047 MB [17:52:14] - Connecting to assignment server [17:52:14] Connecting to http://assign-GPU.stanford.edu:8080/ [17:52:15] Posted data. [17:52:15] Initial: 40AB; - Successful: assigned to (171.64.65.61). [17:52:15] + News From Folding@Home: Welcome to Folding@Home [17:52:15] Loaded queue successfully. [17:52:15] Connecting to http://171.64.65.61:8080/ [17:52:17] Posted data. [17:52:17] Initial: 0000; - Receiving payload (expected size: 74411) [17:52:17] Conversation time very short, giving reduced weight in bandwidth avg [17:52:17] - Downloaded at ~145 kB/s [17:52:17] - Averaged speed for that direction ~145 kB/s [17:52:17] + Received work. [17:52:17] Trying to send all finished work units [17:52:17] + No unsent completed units remaining. [17:52:17] + Closed connections [17:52:22] [17:52:22] + Processing work unit [17:52:22] Core required: FahCore_11.exe [17:52:22] Core found. [17:52:22] Working on queue slot 09 [August 19 17:52:22 UTC] [17:52:22] + Working ... [17:52:22] - Calling '.\FahCore_11.exe -dir work/ -suffix 09 -priority 96 -nocpulock -checkpoint 15 -verbose -lifeline 2708 -version 623' [17:52:22] [17:52:22] *------------------------------* [17:52:22] Folding@Home GPU Core [17:52:22] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009) [17:52:22] [17:52:22] Compiler : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86 [17:52:22] Build host: amoeba [17:52:22] Board Type: Nvidia [17:52:22] Core : [17:52:22] Preparing to commence simulation [17:52:22] - Looking at optimizations... [17:52:22] DeleteFrameFiles: successfully deleted file=work/wudata_09.ckp [17:52:22] - Created dyn [17:52:22] - Files status OK [17:52:22] - Expanded 73899 -> 383588 (decompressed 519.0 percent) [17:52:22] Called DecompressByteArray: compressed_data_size=73899 data_size=383588, decompressed_data_size=383588 diff=0 [17:52:22] - Digital signature verified [17:52:22] [17:52:22] Project: 6600 (Run 5, Clone 989, Gen 127) [17:52:22] [17:52:22] Assembly optimizations on if available. [17:52:22] Entering M.D. [17:52:28] Tpr hash work/wudata_09.tpr: 3653936199 2086054194 2052564426 1991098987 3654545962 [17:52:28] [17:52:28] Calling fah_main args: 14 usage=100 [17:52:28] [17:52:28] mdrun_gpu returned [17:52:28] Going to send back what have done -- stepsTotalG=0 [17:52:28] Work fraction=0.0000 steps=0. [17:52:33] logfile size=0 infoLength=0 edr=0 trr=25 [17:52:33] + Opened results file [17:52:33] - Writing 637 bytes of core data to disk... [17:52:33] Done: 125 -> 124 (compressed to 99.2 percent) [17:52:33] ... Done. [17:52:33] DeleteFrameFiles: successfully deleted file=work/wudata_09.ckp [17:52:33] [17:52:33] Folding@home Core Shutdown: UNSTABLE_MACHINE [17:52:36] CoreStatus = 7A (122) [17:52:36] Sending work to server [17:52:36] Project: 6600 (Run 5, Clone 989, Gen 127) [17:52:36] - Read packet limit of 540015616... Set to 524286976. [17:52:36] + Attempting to send results [August 19 17:52:36 UTC] [17:52:36] - Reading file work/wuresults_09.dat from core [17:52:36] (Read 636 bytes from disk) [17:52:36] Connecting to http://171.64.65.61:8080/ [17:52:37] Posted data. [17:52:37] Initial: 0000; - Uploaded at ~1 kB/s [17:52:37] - Averaged speed for that direction ~1 kB/s [17:52:37] + Results successfully sent [17:52:37] Thank you for your contribution to Folding@Home. [17:52:41] Trying to send all finished work units [17:52:41] + No unsent completed units remaining. [17:52:41] - Preparing to get new work unit... [17:52:41] + Attempting to get work packet [17:52:41] - Will indicate memory of 2047 MB [17:52:41] - Connecting to assignment server [17:52:41] Connecting to http://assign-GPU.stanford.edu:8080/ [17:52:42] Posted data. [17:52:42] Initial: 40AB; - Successful: assigned to (171.64.65.61). [17:52:42] + News From Folding@Home: Welcome to Folding@Home [17:52:42] Loaded queue successfully. [17:52:42] Connecting to http://171.64.65.61:8080/ [17:52:44] Posted data. [17:52:44] Initial: 0000; - Receiving payload (expected size: 74407) [17:52:44] Conversation time very short, giving reduced weight in bandwidth avg [17:52:44] - Downloaded at ~145 kB/s [17:52:44] - Averaged speed for that direction ~145 kB/s [17:52:44] + Received work. [17:52:44] Trying to send all finished work units [17:52:44] + No unsent completed units remaining. [17:52:44] + Closed connections [17:52:49] [17:52:49] + Processing work unit [17:52:49] Core required: FahCore_11.exe [17:52:49] Core found. [17:52:49] Working on queue slot 00 [August 19 17:52:49 UTC] [17:52:49] + Working ... [17:52:49] - Calling '.\FahCore_11.exe -dir work/ -suffix 00 -priority 96 -nocpulock -checkpoint 15 -verbose -lifeline 2708 -version 623' [17:52:49] [17:52:49] *------------------------------* [17:52:49] Folding@Home GPU Core [17:52:49] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009) [17:52:49] [17:52:49] Compiler : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86 [17:52:49] Build host: amoeba [17:52:49] Board Type: Nvidia [17:52:49] Core : [17:52:49] Preparing to commence simulation [17:52:49] - Looking at optimizations... [17:52:49] DeleteFrameFiles: successfully deleted file=work/wudata_00.ckp [17:52:49] - Created dyn [17:52:49] - Files status OK [17:52:49] - Expanded 73895 -> 383588 (decompressed 519.0 percent) [17:52:49] Called DecompressByteArray: compressed_data_size=73895 data_size=383588, decompressed_data_size=383588 diff=0 [17:52:49] - Digital signature verified [17:52:49] [17:52:49] Project: 6606 (Run 6, Clone 44, Gen 272) [17:52:49] [17:52:49] Assembly optimizations on if available. [17:52:49] Entering M.D. [17:52:55] Tpr hash work/wudata_00.tpr: 338706850 1958686959 2065283837 1879048708 2154112435 [17:52:55] [17:52:55] Calling fah_main args: 14 usage=100 [17:52:55] [17:52:55] mdrun_gpu returned [17:52:55] Going to send back what have done -- stepsTotalG=0 [17:52:55] Work fraction=0.0000 steps=0. [17:52:59] logfile size=0 infoLength=0 edr=0 trr=25 [17:52:59] + Opened results file [17:52:59] - Writing 637 bytes of core data to disk... [17:52:59] Done: 125 -> 123 (compressed to 98.4 percent) [17:52:59] ... Done. [17:52:59] DeleteFrameFiles: successfully deleted file=work/wudata_00.ckp [17:52:59] [17:52:59] Folding@home Core Shutdown: UNSTABLE_MACHINE [17:53:03] CoreStatus = 7A (122) [17:53:03] Sending work to server [17:53:03] Project: 6606 (Run 6, Clone 44, Gen 272) [17:53:03] - Read packet limit of 540015616... Set to 524286976. [17:53:03] + Attempting to send results [August 19 17:53:03 UTC] [17:53:03] - Reading file work/wuresults_00.dat from core [17:53:03] (Read 635 bytes from disk) [17:53:03] Connecting to http://171.64.65.61:8080/ [17:53:04] Posted data. [17:53:04] Initial: 0000; - Uploaded at ~1 kB/s [17:53:04] - Averaged speed for that direction ~1 kB/s [17:53:04] + Results successfully sent [17:53:04] Thank you for your contribution to Folding@Home. [17:53:08] EUE limit exceeded. Pausing 24 hours. I give up lol.
what arguments are you using for the gpu's, I'm guessing you'll need to use arguments to ensure you get the correct Ati & Nvidia optimised units to the correct card.
what u mean by arguments - like "-forcegpu"?? if so i used -gpu 0 -forcegpu ati_r700 -local -verbosity 9 and -gpu 1 -forcegpu nvidia_g80 -local -verbosity 9 I also change the machine number in the configs to 2 & 3 and duplicated/renamed all the folders etc
