hey Bit-Tech.. i got an idea for a long time now, and the day i will make my first mod is finally here! pictures!! http://www.octeamdenmark.com/forums/worklogs/8650-mit-foerste-casemod-6.html#post84415 -first i would like to thanks my sponsors and and i would like to say that i´m 15 years old i´m sorry i was a littel late whit the pictures here we go! -this is the plan. - all the pipes are cut, and i had made all the weldings -and here are a overlock.
hey again now i have made a more precis draw of the project - the ligth blue is "see through" and the darker area can´t you see through. the 4 holes is to my fans, and i the oblique area in the front, there will be a fan controller and a on/ off switch.
im back! now i have got my hardware to the mod. ^^ not the noiceblock, i have brought another controller
hey.. i got an idear for the fan mounting, before i don´t want a big mess of screws at the outside of my case so i made this and then i made it! i think it will be good ?
today i had made some more.. first i would like to thanks CUDS over on http://www.octeamdenmark.com he had made the plexiglass fore me. - i have to make a 45 degres cut on the side and how do we do this?? i asked my dad and he came whit this the solution was´nt so gut, but i forgot to take a picture of the other one... sorry - how it will bee -45 degrees cut http://www.octeamdenmark.com/forums/attachments/worklogs/4953d1330799532-mit-foerste-casemod-imag0217.jpg - one of the sides of the case was 4 mm longer then the other, so i have to cut it and weld it agen, and here is the welding
