UPDATE: Corsair 800Dutch MbK Sponsored by: Continuing the story... pasted 1 from the 2 midplates with white vinyl and cut the holes for the tubes After this black vinyl on it... And mounted some LED strips between it Placed some tubes and gives a nice effect Time to connect everything. For this I've used a big amount of Bitspower adapters and fittings: 2x Bitspower Flow Indicator 2x G1/4" Carbon Black Temperature Sensor Stop Fitting 2x Carbon Black Q Plus-Block And Bitspower Carbon Black Enhance 90-Degree Dual Multi-Link Adapter And not to forget the Bitspower G1/4＂Carbon Black Enhance Multi-Link For OD 12MM Connected everything But still not happy, so added some more adapters: G1/4" Carbon Black IG1/4" Extenders G1/4" Carbon Black IG1/4" Extender-15MM And G1/4" Carbon Black IG1/4" Extender-25MM Much better Time to add some more lights. Mounted some more RGB strips to both sides to get a nice enlighted edge: Some orange in front of it: Pasted some white vinyl on the inside and mounted the black fan plate: Same thing with the top Very happy that I've used RGB so I can play with the colors to get the best effect. But like the combination white and orange best Decided then that I will make this an open case, so adjusted another piece of orange acryl to get a nice border. More to come!
UPDATE: Corsair 800Dutch MbK Sponsored by: For the last things to do, I ordered some final products from Highflow CF1 Hard Tube 12/10 mm PETG changed all the acrylic tubes for PETG Always handy, Ultra Pure H20 Some more Bitspower G1/4 Enhance Multi-Link For OD 12MM And not to forget the Pastel - Gigabyte Orange On with the build... after some fooling around with the lights I've decided to make a black border placed around the orange acrylic border. Which gave a nice effect, I think: Time to fill: And another... Finished. Next, final shoot!!!
FINAL UPDATE: Corsair 800Dutch MbK Sponsored by: The final pics are here, hope you like it!!! First without lights: Lights on: And that's it.... hope to see you with the next build. Greetings,
