Hi everybody, I’m here to present you AMG Project. After Delta and Ferrari I ideated this new project. As always I was inspired by my great passion for motors. This is based on Cooler Master Cosmos C700P and the difference with my other works is that I cut the case and I created side pods in 3D. I want to thank all my sponsors that made possible this Case Mod. Cooler Master Asus Rog AMD Alphacool Hyperx Kingston HARDWIRE-CUSTOM CABLES MAKER HYDRA TEAM : MODDERS ESTREMI ITALIANI COOLER MASTER COSMOS C700P POWER SUPPLY COOLER MASTER V750 GOLD ASUS ROG CROSSHAIR VIII FORMULA X570 ASUS ROG STRIX RX 5700 XT AMD
Hi everybody, today I'm here to show you project's planning in 3D. It was an hard work and I spent a lot of time on it. I tried to create what was an idea of a Mercedes AMG in my imagination. The hardest work was to match low lateral 3D part on the frontal panel. Since I haven't a 3D scanner, I measured all the case manually and then I created it in 3D. As you can see by images, I cut case's back part and I did again component's fixing plates. I hope my project likes you and I come back when I will finish to print 3D parts.
Hi everybody, today I come back with new upgrades... I cut case's back part and I prepared down plates where I will fix green plexiglass plates of hardware that I customized with my signature.
Posted December 2 (edited) Hi guys, 3D parts are finally ready and I started to work on them I drilled front panel where I applicated Mercedes logo. I started to assemble and test 3D parts . I installed resevoir and ssd on one of the plates.
sanded the parts several times and I used spray putty to remove layer 3D. After this work, I finished the process of 3D refinement and I used the primer on the parts. Now I assembled again bodywork to see how they look with primer.
Hi guys I come back... I continued to paint all pc parts. I used official opal black paint of Mercedes. On the bodyworks I applied AMG logo using official green colour of Mercedes. I installed also an auto's metal mesh. Now I put Mercedes logo and I started to assemble all.
WHen I finished to assemble, I full custom loop, and I tested all. I show you final photos and video and I hope you like it.
Open back design. Well, there goes one of my designs I've been keeping under wraps. You beat me to it. Fantastic build. The fit, finish and color scheme are perfect.
[QUOTE = "Cheapskate, post: 4863384, member: 31774"] Design aperto sul retro. reoccupato:Bene, ecco uno dei miei progetti che ho tenuto nascosto. Mi hai battuto sul tempo. Costruzione fantastica. :roccia:La vestibilità, la finitura e lo schema dei colori sono perfetti. [/ QUOTE] Thanks bro
[QUOTE = "TodMod, post: 4863975, member: 872729"] Fantastico fratello, lo adoro [/ QUOTE] Thanks so much bro
