Motherboards Bent pin or cracked socket

Discussion in 'Hardware' started by sniperdude, 31 Jan 2013.

  1. sniperdude

    sniperdude Minimodder

    Joined:
    8 Sep 2010
    Posts:
    541
    Likes Received:
    33
    Mate of mine is building a rig and it keeps freezing/hanging it won't even load windows when the i5's onboard GPU is used ( gets half way then BSOD)


    have a look see what you think ....yes its a bad photo

    but from the top left pin go 12 pins to the right and 5 down
    it looks like a break in the socket because all the pin heads seem to be in the right place

    https://docs.google.com/file/d/0B155ERFbo8zuLU9UODFjZ01xUnc/edit

    Download an zoom in
     
  2. RichCreedy

    RichCreedy Hey What Who

    Joined:
    24 Apr 2009
    Posts:
    4,698
    Likes Received:
    172
    it does look like a crack, have you tried to see if there is something there? use a toothpick and gently run it between the pins to see if it moves
     
    sniperdude likes this.
  3. sniperdude

    sniperdude Minimodder

    Joined:
    8 Sep 2010
    Posts:
    541
    Likes Received:
    33
  4. Brooxy

    Brooxy Loser of the Game

    Joined:
    20 Apr 2006
    Posts:
    2,096
    Likes Received:
    122
    Last two pictures look fine to me. Guessing there hasn't been any overclocking on the chip at all?

    Also, am I right in assuming that boot is fine when using a 'proper' GPU?
     
  5. sniperdude

    sniperdude Minimodder

    Joined:
    8 Sep 2010
    Posts:
    541
    Likes Received:
    33
    No OC... its a brand new CPU and Motherboard and RAM

    Tested the ram in my rig and its fine...stuck my ram in his rig and it was still the same
    GPU is ruled out because it can't install windows without it

    half way into the windows install he gets this without GPU (don't look good)
    https://docs.google.com/file/d/0B155ERFbo8zuQ09tNHZfUjdzdGM/edit

    it will install windows with a proper GPU but hangs after a while or during windows update

    PSU ruled out its a week old and worked fine with his old rig

    SSD same as above



    We have set up on a box out of the case right now and its just died again so that rules out shorting on the case



    LOL what's the betting the retailer who will remain nameless will say user error bent pins?
     
  6. Brooxy

    Brooxy Loser of the Game

    Joined:
    20 Apr 2006
    Posts:
    2,096
    Likes Received:
    122
    If the kit is brand new, I'd suggest RMA'ing it, saying that it won't boot.

    Is there another compatible mobo that you can use to test the CPU, just to make sure the mobo is at fault?
     
  7. sniperdude

    sniperdude Minimodder

    Joined:
    8 Sep 2010
    Posts:
    541
    Likes Received:
    33
    nope I am not willing to take my rig apart for my mate lol

    He's just gonna tell them whats going on and RMA them both to the retailer
     
  8. sniperdude

    sniperdude Minimodder

    Joined:
    8 Sep 2010
    Posts:
    541
    Likes Received:
    33
    mate just rang the retailer they are going to pick up everything on the invoice and test it
     

Share This Page