Hello everybody!! new here but been around a little while. Thought I would start new year with a new worklog so here goes enjoy...... The following sponsors were in involved- Gigabyte Cooler Master Koolance Kingston AMD Here is the parts lineup- CM Cosmos II CM Silent Pro Hybrid 1050 watt psu CM fans throughout the case Gigabyte 990FXA-UD7 Gigabyte 7970 x2 ( pending arrival ) AMD FX8120 8 core cpu AMD 16gb ( 4 x 4gb- 1600mhz ) memory Kingston HyperX 120gb SSD's in raid 0 Koolance parts- RP-401X2 Single 5.25in Reservoir Rev.1.1 CPU-370 Radiator, 3x120mm 30-FPI Copper Pump, PMP-400 6- Compression fittings [For ID: 13mm (1/2in), OD: 19mm (3/4in)] 2- 90` elbows clear coolant MasterKleer purple tubing MDPC purple, white and black sleeving. Enjoy some pics. This mod will be at CES with Gigabyte for demo. case and parts Ok so lets tear this baby down possibilities for two 240 rads where HD's are at Thats it for this post i'll do another in a bit.
Ok here's some more pics. some paint and a window. a little white to bring out the CM emblem now the door I had to heat it up some to get the glue to release the aluminum from the plastic. so here's the window prep and getting cut. So here is the window and I added some white stripes on both panels. Here's some color. just a little
Ok so some psu time.... Before... After.... some more paint... and motherboard with Koolance 370 block... installed and adding some tubing... thats it for tonite i'll finish uploading pics morrow.... until then enjoy and thanks for looking!
How many of these cases did CoolerMaster give away! 2 Out of every 3 new mod on here this week has been this case.
You must referring to to the rads that I was showing that you COULD mount down below. Unfortunately I didn't have gpus or blocks for them and time was pressing. I'll be doing another CMII mod this month or early next and I'll do a few things different than this one. That one will be my mod so I'll do how I want not how the sponsors want it.
Hello again everybody! This should be the final pics for my work log. I will upload some pics from CES where it is headed Monday. here is the pump... and here is where the fun starts....... the wires... The two HyperX SSD's in raid 0....... and here's what it will look like with dual GPU's..... didn't have the 7970's yet so I used my 480's for pic... And here it is ready for CES.... Thanks for looking at my work. I'll be doing another real soon but will get a little more involved since there will not be any time restraints. Until then...........
