Cooling Cooler for i5 750

Hi Guys, I'm new to these forums.

I came to this forums while seeing it in custom pc mag.

Here is my pc build:

Intel Core i5-750(Stock Cooler)
Asus P7P55-M
CM Elite-310(Noob Case)
Gigabyte Geforce GTS 250
4GB RAM
2x320GB WD HDD
1xLG ODD
CM Silentpro 700W

I'm experiencing some heat problems as my cpu is 52-55c when idle and around 65c at load

Can someone recommend some cheap n good CPU Coolers to me?

Reminder: As I am using a noob Elite-310 case,I really don't know which cooler is good and can fit in my case.

Any Help Is Appreciated


Thanks!

 

Titan Fenrir
Gelid Tranquilo
Arctic Cooling Freezer 7 Pro rev 2

All will fit in case

 

Also the Akasa Freedom tower and the Akasa Nero S are both capable coolers also remeber to use good thermal paste as that can help shave few degrees

 

Titan Fenrir

 

Titan fenrir 100% - Make sure it's the v2 version or xmas version to have the 1156 bracket. I'm currently waiting for the Evo version to upgrade from the artic rev2

 

Thanks guys... but what about the prices of the coolers? And can my 700W PSU take it?

 

A 700w PSU is ample.

A Titan Fenrir isn't very expensive, around £35 or so I think.

 

All around the same price of £30-35. 700w is more than enough, just make sure its good quality so you get stable power delivery and modular is better for tidyness etc

 

Titan Fenrir is a very good cooler.

 

i used to have a titan fenrir but now ive gone water cooled. but it is really good.

 

ok........but will it be a hard time to install the titan on my motherboard?

 

its not dfficult to install just awkard as you will have to take the motherbaod out to do it

 

I use a Gelid Tranquillo on my i5-750 (very quiet). Idle temps 22 - 24C. That said, Titan Fenrir is also a very good cooler. You might want to look at your airflow plan? Some food for thought here.

 

LOL. Titan Fenrir all the way, freezer pro 7 if you need to save pennies. Do we all read the same magazines or something??

 

i read custom pc mag haha
ok going for the titan fenrir

thanks guys

 

another things to ask is that my elite 310 case only support 1 rear,front and 2 side fans
so how should i place my fans in order to get the best cooling solution of my case

 

Chimeradog - see the link in my previous post for some ideas/guidelines.

The general rule is: front to back - bottom to top, (i.e. intake from front at the bottom, exhaust from back at the top).

 

seanbean i saw the link and figure it out this way

since my case hase no top fans available
im thinking of using the front n side bottom fan to blow in air and the rear and upperside an to exhaust the heat

is the setup this way better this way?

 

My case is the CM 690 II, with the cpu cuttout, that means I don't have to remove my mobo right??

 

guys would a cm hyper212+ fit in my case as well?

by the way in custom pc issue 77 it shows that my P7P55-M is not quite a good overclocking motherboard

can some1 recommend me some good n cheap asus overclocking motherboard

im planning to overclock my i5 when i buy my cooler......if im using stock cooler...how much can i oc?