Today i start my Worklog of my new project. It`s a Contest Casemod at Hardwareluxx But first i thank: Hardwareluxx Klevv MSI Eizo Cablemod Bequiet Curical Aquatuning for the support. Let's start with the name. This is a word game between hunt and hunter. I came up with this because Ali Abbas once said we were like James Hunt and Niki Lauda. Always full of effort and risk and the fight for place 1. And I will chase Ali again. I will convert the case completely, aluminum reinforce and in a gaming Chair with a computer build in. Why a chair? Because desks are to mainstream A few years ago I built the Benchair. During the construction or final assembly and transport I noticed some shortcomings that I would not do so any more. Therefore, the HuntR is a second version of the Benchair. Compact lightweight and space saving. Whether the monitors are integrated with is not yet fixed. Here are the drawings I submitted. Then I immediately started to design the tray. On the Tray the complete hardware is installed. Now I could also order the tours. They came today. Hardly to believe what the heap of material has cost. Then the hardware arived First of all, I then unpacked the case. What is great is the case beautiful can be dismantled. That is why I first developed the tray Since the hardware is completely on a carrier plate I next cut a sheet and rounded the edges. The sides were then beveled Next I installed the drawer rails. These were fastened to the sheet metal with 2 M3 countersunk head screws. In the next step, I have made a power supply unit from a piece of Alublech First measure everything and cut with the vice. Now the position of the hardware could be fixed.