Is there RGB Ram that is low profile if so what do you recomend ? I assume the ram would have to be low profile because in this picture as you can see the pipes coming from the cooler are right next to where my ram is so I would guess non low profile ram might have a problem fitting https://cdn1.imggmi.com/uploads/2019/11/14/cd20bbbaa26bbd6cf5856191de7ae3d0-full.jpg I have a Kraken X52 radiator I have a Asus Z370 Tuff Pro Gaming Motherboard I have DDR4 Corsair Vengeance LPX https://www.corsair.com/us/en/Categories/Products/Memory/vengeance-lpx-black/p/CMK16GX4M2A2666C16
I assume you mean the images of the Viper ram with the red heatsinks ? will this ram fit do you think with no issue https://www.corsair.com/uk/en/Categ.../Vengeance-PRO-RGB-Black/p/CMW16GX4M2A2666C16
Thats just a dual DIMM kit, so easily. If you're planning on getting 2 though, I'd probably just suggest getting a 2x16GB DIMM kit, it'll make you life easier in a lot of ways!
but will it fit ? im guessing (so easily) means yes...sorry I am a bit slow & thick & I was loking for a straight answer
No problem! It will as the two primary slots for dual channel RAM are 2 and 4, so you'll have an extra slot's clearence.
https://uk.pcpartpicker.com/list/d4LhgJ it says Compatibility: No issues or incompatibilities found. should that site throw up a ram clearance issue if there was one ?
not sure what you mean are you saying all 4 slots will fit with that ram with my kraken x52 in place where the pipes are? or are you saying just use 2 slots only as you mentioned two primary slots for dual channel ? can I please get a straight yes all 4 slots will work with that cooler in place with where those pipes are ?
okay I found out NZXT have a live web chat so I asked there Dominic All 4 sticks will fit. It will be a tight fit. But you can also rotate the pump so the tubing is on the top but the NZXT logo will be vertical. ahh ok didnt know that my dad built the pc for me but im glad that it will fit - would the pipes be pushing against the stick in that particular slot or will it only just miss it as you said it would be tight Dominic It will be barely pushing on it if anything.
