Electronics Matrix Orbital Power connecter

Discussion in 'Modding' started by Dash, 29 Oct 2004.

  1. Dash

    Dash What's a Dremel?

    Joined:
    24 Sep 2002
    Posts:
    217
    Likes Received:
    0
    Well I just recieved my MO 20x4 vfd from forkus today and I need to make a modified floppy power connecter to run it. He said I need a 5v cable to run it so I was wondering. Do I connect the red wire from the molex to the Vin+ of the MO and any black wire to the ground?

    Thank you for your help
     
  2. GMan

    GMan Minimodder

    Joined:
    14 May 2004
    Posts:
    309
    Likes Received:
    0
    It's the VFD 2041 model, right? Yes, connect the red wire to the Vin+ of the MO and any black wire to the ground. Here's a link to the manuals at MO: Manuals. Scroll down about halfway to the VFD2041 - the manual has the instructions for doing this on page 7, along with a lot of other info.
     
  3. Dash

    Dash What's a Dremel?

    Joined:
    24 Sep 2002
    Posts:
    217
    Likes Received:
    0
    Thank you so much. I have it up and running. :rock:

    Now I just have to make a bay for it :dremel:
     

Share This Page