Scratch Build – In Progress Project 3: l'ex tonneau,"COMPLETED"

Hi everyone,

it's been that I admire the different mods that can be seen here , and I decided to get serious in the modding with this project.


I show you pictures in chronological order and the explanations

at the beginning







after sanding





Installing hinges and feet

















Installing a system to keep the case open when using the pc





Preview size



I tested the installation of seat belts



I hesitate between tight or discarded ?

Next steps

- Setting up square to strengthen

- Then positioning belts to hide the hinges and afford to keep the case closed during transport

- And setting up of the power supply

- Then implementing the cm and all that goes with (i / o shield , support, cooling ... )

- Then setting up a desert plant next to the config in the housing

- And finally finding a name for the mod

My objective
for this mod is a portable housing , natural ( raw wood and integration of a plant ) , and with the look of a vintage trunk as the subject lends itself well and I find it simpa .

Right now I paused waiting for parts , but I'll be back soon (maybe with a sponsor )

Meanwhile I answer with pleasure your questions!

ps:
sorry for the mistakes , I'm French and I use google translation

 

Well well well ... I'm back !

First Silverstone has accepted to help me in my project by sponsoring me .
For the uneducated , this is a brand that manufactures housings ( housing and accessories), cpu cooling, and power supplies ...
http://www.silverstonetek.com



Here's what they were providing me :



- un aio TD03-LITE http://www.silverstonetek.com/product.php?pid=586&area=en



- A fully modular PSU sfx and semi passive SX600 - g [/ b] http://www.silverstonetek.com/product.php?pid=524&area=en

[url]http://zupimages.net/up/16/21/olrx.png[/url][/ img]

it allowed me to move forward

[img]http://zupimages.net/up/16/21/o5ed.jpg











That's it!

++

 

I still have some details to settle , but I 'm almost done

++

 

it only needs the graphics card and the External finishes

What do you think of my work ?

 

nobody gives its opinion ?

 

I like it a lot

Will you also do work on the hardware itself?

 

Orginal mod

You should change the mobo tray and use some wood.

 

Very original it should look really good when complete.

 

"Will you also do work on the hardware itself?"

No, I want to keep warranty

"You should change the mobo tray and use some wood."

I wanted to use wood, but it was too twisted and forced it too much into the rails


Thank you for your review and compliments

 

i absolutely love the 2 last pictures!
this build is sooo cool.

 

Thanks !!

 

So here it is time to put an end to this mod which I hope you will have liked. For me in any case it allowed me to learn a lot and I had a lot of fun.
Although it is not perfect, I could still spend time and money for the finishes, but I have neither, and the box as it pleases my brother so it is the main.





I thank Silverstone without whom this project would not have been born



As well as all of you who have supported me and / or helped with the project


See you soon on another project

 

Gratz and nice work! I think even my wife would approve of this haha

 

Thanks !!!
I doesn't have a wife but my mom approve too