Project Midnight It's time to start a new Mod Hardware: Case: Corsair 500D CPU: Intel Core i9-9900K Motherboard: Asus STRIX Z390-F Gaming GPU: Asus Nvidia GeForce RTX 2070 Ram: DOMINATOR Special Edition CONTRAST 32GB (4x8GB) DDR4 3466 (PC4-27700) C16 PSU: Corsair HX750i Cooling: Full Custom
I could not resist and I immediately started to dismantle it An extremely simple and minimalist case but now we will modify it
And here we go again! While the dismantling continues, take a quick look at some cool products that will fill up our mod.
Today a couple of strong images! No mercy for the poor 500D ... Removed the external cover panels, let’s dismantle the frame up to bring out only the essential components. Cut, drill, disassemble. Repeat.
Now that everything has been reduced to the bone, let’s begin to install the first custom component: a nice plexiglass back panel. Oh, if you thought the power supply plate could save ... well, you’re wrong.
New week, new updates! Here's the motherboard support and the front panel that will also act as a tank for the custom loop. The new structure begins to take shape!
Today a little update before the final steps! Reinstalled the power supply cover and first custom panels applied, waiting for the top panel that will cover the structure completely.
Greetings guys! New tasty update tonight! Now that the main structure has taken shape it's time to unveil a little gem: Panel with engraved pattern with Corsair logo in plain sight and also a pump support for clean and nice mounting. Check the nice custom pump top Stay tuned for the next steps, now we are near to finish!
Hey there! Time for a nice update today we take a look at the wonderful STRIX Z390-F Gaming, maybe the most suitable motherboard for our mod thanks to its design. The custom waterblock finally appears, waiting for the complete custom loop, ready to light up the stage. Stay tuned for the next update!
Here we go again guys! Time for a huge update! After some initial images of the finished structure and part of the hardware that will be installed inside, here are other interesting goodies like RGB fans and a beautiful RTX 2070 Strix! Completed also the cover for the power supply and start to see the first wiring of our HX 750i, all strictly custom and with brand new dedicated cable comb. Stay tuned tomorrow for another big update!
Good morning guys! Today a little but tasty update with some shots of the interior side of the mod. The custom loop starts to take shape, the new RTX 2070 Strix is also added and the spectacular Corsair Dominator Contrast finally make their appearance! Stay tuned for the grand finale, now coming soon!
Hi Techno! is a 3 panel 3mm- 10mm-3mm pasted with acryfix (a special glue for acrylic ) and finally polished and engraved
While waiting for new and tasty updates, take a look at this unboxing video Do not forget to leave a like and subscribe to the channel!
Good evening guys! Today a little more information about the cables used for this mod. Look at the great work performed by our friend from Enter Plasma with those nice handcrafted sleeved direct cables combined with my new series Slate comb.
Wonderful work as always, and thank you very much for the support and the shoutout Can't wait to see the finished mod!
Here we go again guys! While I make you wait another little bit for the final photos, enjoy these little details that we have neglected so far. Stay connected because this time we are really close!
Here we go guys! Finally we have reached the end of our mod. After waiting so long, make yourself comfortable and enjoy the shots below. I hope you enjoy it!
