Case Mod - In Progress Project : TrafficControl

Discussion in 'Project Logs' started by PFS*, 23 Jul 2008.

  1. PFS*

    PFS* What's a Dremel?

    Joined:
    16 Oct 2007
    Posts:
    24
    Likes Received:
    0
    This is the log that I have started on one of our proudly South African sites. I Have been around Bit-Tech for awhile, but never have the good stuff to post. This project is going to take some time, but will really push to get it done ASAP, so please bear with me.

    Hi Guys & Gals

    Been toying around with modding for a while and have been blown away by some of the stuff i've seen. So I have decided to start a casemod log. Once I find a reliable supplier I might just go full blown scratch build, but in my area that is very hard to do. Anyway

    Firstly I had to clean up.
    Modding Area
    Before
    [​IMG]
    After
    [​IMG]

    I know, still a mess, but better area. So here is what I have done so far.
    The case (already semi stripped)
    [​IMG]
    &
    [​IMG]

    Etching
    Outlines and detailing
    [​IMG]
    Shadowing
    [​IMG]
    Please excuse the finger prints on the plex.
    The "color theme" so to say is:
    [​IMG]
    Painting done so far, the base color on (2 coats primer + 3 coats matt black) [Yellow detailing still to come + clear coat]
    [​IMG]

    Thoughts so far anyone?
     
    Last edited: 23 Jul 2008
  2. bigsharn

    bigsharn Officially demotivated

    Joined:
    9 May 2008
    Posts:
    2,605
    Likes Received:
    83
    Looking nice:) the etching work kicks arse

    *sub'd*
     
  3. ry@n

    ry@n Minimodder

    Joined:
    31 Aug 2005
    Posts:
    1,135
    Likes Received:
    43
    The bearded bear is sweeeeeeee... eeeeeeeeeet very cleanly done. Good luck with this project.
     
  4. x06jsp

    x06jsp da ginger monkey!!!!

    Joined:
    2 Apr 2007
    Posts:
    1,651
    Likes Received:
    1
    Awesome awesome etching! it looks so clean and perfect!
     
  5. PFS*

    PFS* What's a Dremel?

    Joined:
    16 Oct 2007
    Posts:
    24
    Likes Received:
    0
    Thanx for the comps. Have sprayed the case's one side panel sofar the full colors, just needs clear coat, sanding, coat, sanding... u get the point. Have a couple of idea's with the other 2 windows that i want to etch.
     
  6. DonT-FeaR

    DonT-FeaR I know what a fk'n Dremel is ok.:D

    Joined:
    23 Jul 2008
    Posts:
    867
    Likes Received:
    14
    this shall be sweet!! the bear looks killer nice work
     
  7. Oreon_237

    Oreon_237 CHEA BRO!

    Joined:
    11 Dec 2007
    Posts:
    1,170
    Likes Received:
    1
    really nice etching man, it PWNS
     
Tags:

Share This Page