Small Form Factor Right angled AGP converter/riser

Discussion in 'Hardware' started by madmuppet, 17 Dec 2003.

  1. madmuppet

    madmuppet What's a Dremel?

    Joined:
    13 May 2003
    Posts:
    3
    Likes Received:
    0
    Does anyone know where i can get a right angled AGP riser, i found loads of sites doing the PCI card one but none for an AGP port.
     
  2. sco0by

    sco0by Mmm pie.

    Joined:
    12 Dec 2001
    Posts:
    843
    Likes Received:
    3
  3. Captain Slug

    Captain Slug Infinite Patience

    Joined:
    25 Nov 2001
    Posts:
    1,403
    Likes Received:
    7
    I have a 2U AGP riser I don't need. If you want it just send me a PM
     
  4. madmuppet

    madmuppet What's a Dremel?

    Joined:
    13 May 2003
    Posts:
    3
    Likes Received:
    0
    thanks for the replies - i'm after the smallest one possible so i think the 2U one might be a bit big.
     
  5. Golden-1

    Golden-1 Minimodder

    Joined:
    23 Aug 2003
    Posts:
    191
    Likes Received:
    15
  6. Poison The Well

    Poison The Well What's a Dremel?

    Joined:
    19 Dec 2002
    Posts:
    100
    Likes Received:
    0
    What exactly do right angle AGP risers do? Just swith the orientation of the AGP card?
     
  7. Wndrbread

    Wndrbread What's a Dremel?

    Joined:
    13 Dec 2003
    Posts:
    67
    Likes Received:
    0
    Right angled agp risers raise the card a bit and make the card lay parallel to the motherboard
     
  8. Poison The Well

    Poison The Well What's a Dremel?

    Joined:
    19 Dec 2002
    Posts:
    100
    Likes Received:
    0
    So it would allow you to put a graphics card with an oversize heatsink / fan into a SFF case? Gothca.
     
  9. njin

    njin What's a Dremel?

    Joined:
    29 Dec 2003
    Posts:
    3
    Likes Received:
    0
    Hmm, don´t you need a LEFT angled riser card to let the agp card point to the cpu? Those I´ve seen make the card lay parallel to the PCI slots, so they won´t fit in a SFF case, do they?
     
  10. Wndrbread

    Wndrbread What's a Dremel?

    Joined:
    13 Dec 2003
    Posts:
    67
    Likes Received:
    0
    Dunno i dont have a SFF iv only seen them on Servers and they lay them over the PCI slots so they can make 1u units fit
     
  11. njin

    njin What's a Dremel?

    Joined:
    29 Dec 2003
    Posts:
    3
    Likes Received:
    0
    Right, but most of the motherboards in SFF cases, like the FN45 in my Shuttle SN45G, don´t have more than one ore two pci slots. Standard atx mobos got five or more left-handed to the agp slot. Consequently I got to use my Dremel to be able to use such a riser card! :D So I would need one that makes my graphic card point to the other direction to make it lay over the cpu...

    Know what I mean?

    [​IMG]
     
  12. Pistol

    Pistol Guest

    If you have a full tower ATX mobo riser, then use this riser. Otherwise it would be useless in a SFF pc
     
  13. 1398342003

    1398342003 Ubermodder

    Joined:
    2 Sep 2002
    Posts:
    960
    Likes Received:
    1
  14. counterclockwise

    counterclockwise What's a Dremel?

    Joined:
    17 May 2003
    Posts:
    331
    Likes Received:
    0
    they are really hard to fornd... captain slug, i'd be interested in your riser, can i have some dimensions please?
     
Tags:

Share This Page