Hereby I present to you: The "Server Case 2.0" This is the restart of my "Server Case" build, which I only posted on dutch fora. First things first, I will introduce myself. I'm Yorick, I live in the Netherlands, I like working with computers a lot, and also the making of my own pc cases. Enough with the talking, lets start with the build! Which Hardware?: Intel® Desktop Board D915GLVG 2GB DDR ram 4x SATA Schijf (3x 80gb, 1x 40gb) 2x IDE Schijf (2x 120gb) Cooler Master Hyper TX3 EVO FSP 300-60PN (PF) 120 mm fans I still have to buy A hole lot of cables What do I have to do: [ x ] Get all the hardware. [ x ] Getting the wood, and making it the right sizes. [ ] Make the holes for the casefans, and mod them with resistors. [ x ] Mount the casing. [ ] Mount all the hardware. [ ] Replace broken hardware with working ones (I break a lot of it). [ ] Get Plexiglas for the cover. [ ] Putting it all together. I probably forgot something, but I will change this during the process. What will it look like?: Here the most important part, the renders (in sketchup).: In the cover, there will come an plexiglas plate (if affordable). For who wants to see it in full 3D, the sketch up is downloadable here: http://www.fileswap.com/dl/XIKfHv177r/ Cutting straight by using a wooden plank. When I was ready with the wood, I spread it out. Attaching all the sides to the bottomplate. attaching all the distance pieces to the base plate. Then I tried if it fits, and it does! Only I lost my screws Cut a hole voor de PSU, and it fits perfectly. Put it all together, and it looks nice. I only need to drill the fan holes, but this will come when I have two of them. Thats it for now, untill the next time!