VisionTek HD4850 error

Discussion in 'Tech Support' started by bxgeant, 5 Sep 2008.

  1. bxgeant

    bxgeant What's a Dremel?

    Joined:
    22 Sep 2007
    Posts:
    23
    Likes Received:
    0
    ive tried goole already, i had 2 HD4850's then installed a waterblock, left it in my closet for a month or two, dont ask why, now with my loop runing in full, the lights on both cards, both leds, blink on and off, what does it mean, dose it mean there dead, no info so far on flashing led, both red flashing led':waah:s plz help
     
  2. Matticus

    Matticus ...

    Joined:
    23 Feb 2008
    Posts:
    3,347
    Likes Received:
    117
    Well I know nothing about these cards, or LEDs on the cards, but my guess would be that they want a fan plugged into the fan header. Some motherboards wont start without a cpu fan plugged in so it may work like that.

    Is the PC just not booting at all, we need a bit more info on what actually happens when you turn the PC on, and what the rest of your hardware is.

    The best thing to try is plugging in the fans of the stock coolers, you can leave your water blocks and loop running, just have a fan in the fan header and see if they will boot up like that.
     
  3. bxgeant

    bxgeant What's a Dremel?

    Joined:
    22 Sep 2007
    Posts:
    23
    Likes Received:
    0
    Thats for the reply matticus, well, i have made some progress. The computer boots through post with abosolutly no problems , except the 4850 displays no video, i also hae no leds lit up soo im error free, im guessing i gotta check out my loop
     
  4. bullseye969

    bullseye969 What's a Dremel?

    Joined:
    8 Sep 2008
    Posts:
    16
    Likes Received:
    0
    Yea probably a problem with the loop
     
  5. chrisb2e9

    chrisb2e9 Dont do that...

    Joined:
    18 Jun 2007
    Posts:
    4,061
    Likes Received:
    46
    correct me if I am wrong but there are actually 4 lights on the 4850. if I was home i would look at mine to confirm this. anyway, assuming that there are, they should have the same meaning as the 4870, which someone has listed here:http://www.visiontek.com/forum/view...d&sid=68034667052b75439b98907c566bf73e#p11931

    Check which lights are lighting up for you and that should help figure out whats wrong.

    and what power supply do you have?

    the reason I ask is that 3 of the 4 lights have to do with power.
     
    Last edited: 8 Sep 2008
  6. bxgeant

    bxgeant What's a Dremel?

    Joined:
    22 Sep 2007
    Posts:
    23
    Likes Received:
    0
    Thanks chris, however im preety sure there only two led's and none of them power on, it does its quick 100 percent fan test while all lights are on, it does its check up and resumes normality except no videoout put, ive heard this haves something to do with over heating?
     
  7. WTF_Shelley

    WTF_Shelley The picture is wheeljack

    Joined:
    6 Apr 2005
    Posts:
    185
    Likes Received:
    5
    have you tried just one to see if its a crossfire problem? A mate of mine could get his to work (not w/c) turned out he had the crossfire strip upside down:duh:
     

Share This Page