My son's computer: dual loop watercooled P4 in a modded chieftec full tower case. More pictures here: http://www.crazypc.ro/forum/showpost.php?p=38294&postcount=110 I hope you like it.
My rig - also a dual loop watercooled P4 D940 and more.... photos in an earlier stage: http://www.crazypc.ro/forum/showpost.php?p=55931&postcount=195 and simple logs of my work: http://www.crazypc.ro/forum/showthread.php?t=1278 It's in romanian but pictures speak for themselves .
My Case-Cubeoid Well here is my case, not sure i should be actualy showing it off, since the ones on here are amazing..... Anyhow here goes a few more shots of it, and yes believe the hype they are huge, but well worth it Link-1 Link-2 Link-3 Link-4 Link-5 Link-6 Link-7 Link-8 Link-9 Link-10 Link-11 Link-12 Link-12 Link-13 Link-14 System specs as follows:- Motherboard : Abit IN9 32X-Max CPU : E6600 (week 28 : retail) Memory : Corsair Value Select 2gb of ddr2667 Hard Drives : 2x Seagate Barracuda 7200.10 (320gb 16mb cache) Graphics : Nvidia pcie 7900gs (512mb) Sound : Creative Labs soundblaster audigy 2 Speakers : Creative labs GigaWorks S750 PSU : Enermax Galaxy 850 Case : Mountain Mods U2-UFO Horizonon Monitor : Viewsonic VA2012w Cooling : Alphacool Laing DDC ULTRA Pump & Plexitop Swiftech Apogee GTX Extreme ThermoChill PA120.3 Swiftech MCRES-Micro 6x Sharkoon Silent Eagle 2000 1/2 tubing and barbs Misc : Sunbeam Rheobus Black : Matrix orbital MX432 Abit Guru clock 2 4x akassa 12 inch UV cathodes Comments aprciated and i have a boat load more pics if anyone is interested
imac case mod. fully liquid cooled finally finished. sorry no work log on this one. most of the work was leak testing anyways. specs are as follows: 6gal freshwater 2x male guppies ( to start the bio cycle) some fake plants and a ceramic log with an airstone inside. small 10gph submersible filter. i havent really decided what type of fish im gona end up with. if any aquarium enthusiasts wana drop me a line id be gratefull. more pics: pic-1 pic-2 pic-3 pic-4
The Hypno-Toad... This little ugly is made from a 1975-2006 garage worktable surface and an old display case. Total case cost was under thirty US dollars-(most of that was screws and rivets.) The on switch is actually a marble from a spraypaint can. The name came to me the instant I plugged that NOISY stove fan in.
Chromated Sticker Name: Darth Invader - Chromated Sticker City: São Paulo / Brasil Description: Another one of the series Cases Done with Oddments: * External forage with Sticker Vinyl Imitating the Chromated Effect. * Made window in Dremel * Rubber U black * Acrylic Crystal 3 mm * Done to the Friend Angelo, without charging workmanship (Oh and $#@@# did not pay neither the Sticker yet!!!) Project link (Portuguese):
C@lvin by Darth Invader Name: Darth Invader / C@lvin City: São Paulo - Brazil Description: *Installation of Two Sources at the bottom case, and Built an Aluminio's Base to Hide the Sources and Neon's Reactor; *Riveted an Aluminio's Plate to Stopper burado private for the Source; *Handles installation for Transportation; *Cover in U cut to turn 3 covers; *side cut done in Dremele Serra 80mm and superior with Serra 120mm ; *Rubber U black for Finishing; *Neon Blue of 8w; *Hole *3 Fans (2 of 80 in the sources and 1 of 120 (fan of Mac) in the top) *Laser Grill Alien 120mm *Source cables cloaked with tube of Shower (get dismounted molex and past the cable inside of the hoses; * Key on/off of Neon in the rear; * Internal painting, Cd-rom, CD-RW, Zip and Diskette, Spray Chromated of Colorgin; * External painting Spray Graffiti for Cologin's Wheels; Fact in 2003 to and with the help from my friend C@lvin. Project link (Portuguese):
Marcelo Santana by Darth Invader Name: Darth Invader for Marcelo Santana City: São Paulo - Brazil Mark: Vcom Description: Case to my neighbor, in emergency because I was a personal computer that lived turning off to itself and that was boiling. Modifications: Installed two fans of 80mm in front pulling the air into case. 01 fan in the lateral pull the air into case. 01 fan of 120 in the top pulling the air outside case. Lasergrill Atomo and Radioactive HD installed in a stall of 5 1/4 with help from screws to fasten and installed a cooler of hd. Illuminated by a Cold Catold Vantec. Thumbscrew in the HD, Slots and Covers. Made window side in the tick-tick and rubber black to give finishing. Stealth in the DVD's Recorder Project Link (Portuguese):
Mancha Verde Name: Mancha Verde (Green Stain) City: São Paulo - Brasil Description: This is case it of my brother-in-law. Done duto in the Superior Window to be able to visualize the Cd-rom acrilico cover; window side cut in the Stain format green; Plastic pieces illumination green with Blue LED to allow the colors change; Fan of 80 More Pictures and post (portuguese):
Hi@all Im new here and I'd like to show you my Case. The name i project conari or just conari, deduced by the word conari (Latin) which means to try. I called it this because it was my first try of Casemodding, hope ya'll like it More Pictures Project Log (german) mfg, hu$tla
My Lian Li G50 mod New jet black top panel, new mesh side panel, LED light in the front, internal laser LED and top mounted LED temperature display. -black n red rules
hello you know me under my true name maritorena, my nickname on the forums is “Virus-Frederic” I present my other MODS 100% HOME-MADE to you FRIST MOD "SAMOURAI" http://img85.imageshack.us/img85/3508/225uv6.jpg http://img218.imageshack.us/img218/5011/216mj3.jpg http://img220.imageshack.us/img220/9026/220ri5.jpg SECOND MOD "VIRUS" http://www.kirikoo.net/images/1virus fred-4-20060504-174850.jpg 3 MOD "O.P.M.TT" military portable odinator any ground all elements in place http://img89.imageshack.us/img89/6655/339gp7.jpg the gun starts the computer http://www.kirikoo.net/images/1virus fred-4-20060817-195259.jpg my last MOD in the course of manufacture "TERMINATOR" Endoskeleton http://img104.imageshack.us/img104/8716/te004bda7.jpg http://img47.imageshack.us/img47/8341/te004clr3.jpg http://img170.imageshack.us/img170/543/128ap5.jpg http://img166.imageshack.us/img166/8094/131vg7.jpg http://img409.imageshack.us/img409/34/193ja4.jpgI am currently making the legs