the fan is now ready to place it front and I'll put a little rubber to isolate any vibration. I also made the protective grille with copper wire. Some details in the union of the bays. So far is Thank you very much.
I have never liked steampunk, and I never will! But that being said, I can surely appreciate the amount of work put into it, and the beauty of details!
yes is true, thanks steampunk is very particular, but as you say, the amount of work put into it, worth it.
Thanks guys: D Now I'll show you how is the top, where the chimneys are almost ready. First I painted the brass parts I made the frame for supporting the chimneys. After painting part of the chimney of black, pipes were connected. soon the another side
Thanks jhanlon303 Now, the other side, there were some air intakes covered with metal mesh, also you can see the inside of the door frame. More pieces were constructed according to the thematic. I put everything in place, test only, the side will be sanded and painted. Barriers separate and sanded, then painted. The brackets I made with metal mesh, I gave him a white background then painted bronze. to compare. Thanks and vote if you like this proyect http://forums.bit-tech.net/showthread.php?t=225611
thank you Phyonics Some details, before the final photos. process of creating the supports for the dome. The liquid level modify a bracket screws the tube was made with a plastic bottle and the liquid mixture of glue and coolant. voila. The door lock detailed work then welded to the lock Change the PSU and make some changes to this more in keeping with the modding Thanks!!!
some pictures nearly the end this is old school modding is not buying : P Thank you very much everyone.
Nice work, you going to do keyboard and mouse for it at all? if so you can always search ebay for watch innards or watch spares, sometime find plenty of lots with loads of clocks and springs, very steam punk style.
or scrounge a clock from yard/garage/tag sales, charity shops or the like. mechanical clocks seem to be a 'toss out' item. Sad, that. john
Thanks the votes don`t say that... ha ha ha ha is a joke Some updates, I put the handles were missing, and I think a pressure gauge to control the vapor pressure, where it says RPM, PSI should read, I was reading something else when I create it . detail of how the dome is placed and so ended. I covered the back with a metal mesh that was open. I decided to extend the front buttons to be more practical to use. As you will see are just little things that go unnoticed but that make the detail of a complete work, thanks.
