Modding My Yeong Yang Cube | Update! check out my sweet Keyboard MOD!

My mom's bike is the one with the sidecar, the other two are my dad's






thats not gold paint, its real gold leaf.




At one point my parents both had their touring bikes and then they had their sportier around town ones. Sales were REALLY bad one summer at the Domino's stores and we had to sell my Mom's wide glide. Boy she was pissed.

 

Schweet dude! What's the chances of you getting to ride them

/back on topic .... if we must

 

Nice bikes! lol, the flash blurs out the licence plate for you, so no editing needed!!

On topic: One sugestion, maybe move the cathode to the bottom of the case (ie: on the floor, up tight to the side, so you dont see it), that might give better lighting. Or that might be the pic, hard to tell.

looks good! love the LED thing for the res! i might have to do that with mine

 

dominoes does deliver!!

 

the lightingis deffinately a lot more even looking than what the camera lets. If I put the CCFL in the bottom, then the graphics card shades the top. If I put it on the rear side then it shines into my eyes when its up on my table in my room.

 

Kinda thought it was the pic. Most cams dont show lighting well. Either way, nice case!

 

Awesome case, Morphine! I love the res on the top! How's that pump doing? I was looking at that exact same one as my Danner's springing leaks left and right. I patch up a hole and another forms a day later and I'm getting tired of it. I'm trying to decide between the Hydor and Eheim's.

ANd where'd you get your UV dye from? You complained that it wasn't very bright, and as mine came from Directron, it's pretty weak also. I'm thinking that it may be the Tygon tubing I'm using, or your Clearflex - if it has some UV resistant coating or something, that may be causing the dullness.

 

my dye came from directron as well. Ther pics are very misleading.

The hydor pump is pretty good. It's the L30 model, and doesnt seem to have any problem at all with my system. It's also pretty quiet and is probably smaller than the eheims, right?

 

This system is now dead! This is the second Soyo board that has died on me, and I know other people who have had the same exact failure as I describe in this thread I would suggest not buying Soyo mtherboards, as they die unexpectedly and have a rather short life span.

 

Bugger I hate it when something fails purely because it hasn't got the staying power.

Never used Soyo and never will.

Three makes I would only ever consider:

Abit
Asus
Epox

Probably in that order of preference as well.

Hope your up and running soon.

 

what would you say t AOpen? might be getting this and 512mb of DDR400. tis a good dea I think for under 200 bucks

 

nice bikes and a nice rig

 

thanks

 

just to let you know i sent two of the VFD that didn't work.
one worked for a few days until i mounted and other i switched 1-3 power cord and the wire melted...

also along with one alum brushed mesh

 

I sooner eat my own leg then buy anything other then the makes I have suggested.

Anything else you pays your money you take your own risk

The only A-Open boards I've seen in the flesh have been dead ones or ones that don't work that well, like buggy!

 

I've used a few aopen boards. There ok, but i would have ot agree with [GiB] Spawny in the fact that you should stick with Asus, Abit, and Epox. A quick search over at newegg.com showed that the Asus A7v8X board is only $70usd, And the A7n8X is only $115usd. Those are nice boards, and there Asus. I've used them both and been very pleased.

 

Y-Y cube looks well sweet Sorry to hear that the mobo died (r.i.p soyo mobo)

I only ever use ABIT mobo's, and apart from the raid crash I had (down to a power connector on the drive) I've had no probs.

/looks on ebay for Y-Y cube at half price!!

Darkside.

 

Your chair didn't look very comfortable

It's important for your back. hehe.

 

the chair isnt that bad, after 4-5 hours you start gettin sore

 

OMFG WTF.

Why did that com e here??? I posted it in another Thread???
And why can't I delete it???