Scratch Build – Complete ModArt QUADRAD Custom Case Project Final (World First)

Hello to everyone.

As you can see, our project is complete. I posted late because of personal problems. sorry.

Yeah. I hope you like the project very much. We showed the construction stage in a separate article.


Click on the link below for the project's construction phase.

https://forums.bit-tech.net/index.p...m-case-in-the-world-update-23-03-2017.316264/










I will specify the system hardware tomorrow.

 

Yeah, it's a little big. But it is the same size as other cases.

My case 80x80cm

In my case there are 5.25 drive nests in the front and rear.
And there's a 360mm radiator on case 4 side. And every radiator can be fitted with a pull push fan.
In this size there are not many features in other cases ..

 

System hardware.


1- MSI Z270 XPower Gaming Titanium Motherboard

2- MSI GTX1080 SeaHawk EK GPU

3- MSI GTX1080 SeaHawk EK GPU

4- İntel Core i7 7700K Cpu

5- Gskill Trident Z 64gb 3600Mhz Ddr4 cl17 quad Ram

6- Samsung 960 Pro M.2 SSD

7- Samsung 960 Pro M.2 SSD

8- Samsung 960 Pro M.2 SSD

9- Seagata Barracuda 2TB 7200 RPM HDD ( 4 PCS )

10- Corsair Neutron XTİ 960 gb SSD ( 4 Pcs )

11- Corsair AX1500i Power Supply

12- Creative Sound Klaster ZXR Sound Card

13- Corsair HD120 RGB Fan 8pcs set (24 pcs total fan )

14- Corsair lightning Node Pro ( 3 Pcs )

15- Orico HDD Switch ( 2 Pcs )

16- Msi 2 way large HB Bridge

17- Lampron CW 611 Water Cooling Controller ( 2 Pcs )

18- Lamptron CM 430 Fan Controller (2 Pcs )







Peripherals:


1- ASUS Rog Swift PG279Q 27’’ 165Hz 2K Monitor ( 3 Pcs )

2- Corsair K95 RGB Platinum mx red mechanical Keyboard

3- Corsair M65 Pro Rgb Gaming Mouse

4- Corsair Void Rgb Yerllow Jacket Headset

5- Corsair MM800 Rgb Mouse Pad

6- Fantec 4 Bay Hdd Box





Water Cooling:


1- Ek Water Cool Streem XE 360mm 6cm Radiator ( 4 Pcs )

2- XSPC D5 Vario pump ( 4 Pcs )

3- Barrow Acrylic Pump Top ( 4 Pcs )

4- Barrow Red / White Pomp Cover ( 4 Pcs )

5- Barrow 14mm hard tube fitting ( 68 Pcs )

6- Barrow Electonic Flow Meter Acrylic ( 4 Pcs )

7- Barrow Red White cap Water Filter ( 4 Pcs )

8- Barrow Water Valve ( 2 Pcs )

9- Barrow Pressure Valve ( 4 Pcs )

10- Barrow 90 Degree fitting ( 28 Pcs )

11- Barrow 45 Degrees Fitting ( 4 Pcs )

12- Bitspower 90 Degree Fitting ( 8 Pcs )

13- Bitspower 72mm Fill Port (1 Pcs )

14- Mansoon Thermal Censor ( 4 Pcs )

15- Barrow Stop Fitting ( 6 Pcs )

16- Barrow Acrylick 5 Way Rotary Fitting ( 7 Pcs )





Panel Mount Accessory:


1- Power Connector Mount with buton ( 2 Pcs )

2- Optic Panel Mount ( 2 Pcs )

3- Aux Rca Sound Cable Panel Mount ( 6 Pcs )

4- Ethernet Cat5 Panel mount Cable 60cm ( 2 Pcs )

5- Usb 3.0 Dual Port Panel Mount Cable 90cm ( 6 Pcs )

6- HDMI Mount Cable 90 Cm ( 4 Pcs )

7- Display Port Panel Mount Cable 90 cm ( 6 Pcs )

8- 3.5 mm Stereo jack Panel mount cable 100cm ( 6 Pcs )

 

World first what?

Also, could you please resize your pictures. They are absurdly large (7 mb for one picture. It should be around, or less than 1 mb maximum), and take forever to load.

Third, why not just post final pictures in the original worklog?

Other than that, great work on that custom case! The inside is a bit to busy for my taste though.