Case Mod - In Progress Project Prime

thanks man

 

All this white just makes me love it more and more!

 

thank you! it's almost finished, bending it's 90% completed, will fill the loop this week

 

Ok the build it's finished, here some pics from the final photoshot, hope you like it







More pics incoming, stay tuned

 

The rest of the pics





































Hope you like it!

 

So fresh, great looking build.

 

Some other pics of the Seasonic Platinum PSU

 

What spray primer did you use for the EK pump?None of the primers I'm using hold on EK parts.

 

clear for plastic, i bought it to the local shop, can't remember the brand

 

Nothing seems to stick on this Acetal I don't know if I'm missing something: primer for plastic - sand the surface with 600 sandpaper - clean with alcohol and then spray . After is dry I can peel the primer even with my nail

 

you have to sand before the primer, i started with 180 sandpaper

 

This is what I've done before the primer.The thing is,that I used only 400/600 sandpaper .

 

Use something strongher first, start with 180 at least, then go for 400/600. How mutch time do you leave the primer to dry? I usually do 3 coats of primer, 1 each 5 minutes and then dry for 30 minutes. Then 3 coats of colour like the primer and dry for 24h

 

I do two coats of primer, 15 min. between the coats this is what is ways on the back of the can.And then three layers of the maim colour. Probably the primer is not good enough or it's just don't cover Acetal.