1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Case Mod - In Progress Skyrim: Dwemer's Build - Big Update

Discussion in 'Project Logs' started by TheGreatSatan, 2 Sep 2013.

  1. TheGreatSatan

    TheGreatSatan Member for 17 years!

    Joined:
    5 Aug 2005
    Posts:
    1,885
    Likes Received:
    627
    Small update:

    For the top left panel I cut the copper piping I'm using for the panel. It goes over the window to break up the obvious rectangle window on a Dwemer ruin.

    Once it's mounted, I'll complete the rock under-surface too

    [​IMG]

    [​IMG]
     
  2. TheGreatSatan

    TheGreatSatan Member for 17 years!

    Joined:
    5 Aug 2005
    Posts:
    1,885
    Likes Received:
    627
    I was up till 3 a.m. working on this and here's what I did.

    I bought more of the metal mesh for the top of the bottom case

    [​IMG]

    [​IMG]

    Like so...

    [​IMG]

    And it doesn't need to be perfect either

    [​IMG]

    I'll need a non-conforming window/hole for the top case right panel

    [​IMG]

    [​IMG]

    Some mesh will be here too. . . . . . rock on the way

    [​IMG]

    Next, I'll need a go-between pipe that will disguise cables going from one case to the other

    [​IMG]

    [​IMG]

    I just have to make them stay together with a joint. I could only find plastic ones that would fit

    [​IMG]

    [​IMG]

    It just needs paint to look real

    [​IMG]

    While that dries I move on to the rear bottom exhaust fan

    [​IMG]

    And the copper drain cover for the grill

    [​IMG]

    The mesh I cut is dry and ready!

    [​IMG]

    Now to break up the transition from the case to the metal mesh with a big rock

    [​IMG]

    I used a brush to add levels of lights and dark colors. Hopefully it'll look more realistic once it dries

    [​IMG]

    [​IMG]

    [​IMG]
     
    Last edited: 3 Oct 2013

Share This Page