Cooling Zalman Reserator 2 !!!! Problme!!!!

hello < Guys However I did ! Forgive me

I found x1950xtx and bought it and my system running now But : Water Cooling
I Start Think After See some photos and feel The water Slow

Mean The Round flow indicator '' Rolling '' Slow I don't Know Why

And When I Tried To start it It It was not want now it run very slow likely it will stop
I need To know Now because Tomorrow Morning If it damage I will Change it after that I can't

thanks

Note : Speeling + Grammer + Engllish THey BAd But I dont Have Thing To do !!!
Im Very MAD ( THIS FCKING SYSTEM WORKING OR NOT !!!! )

Mine Not Run Like THIs PHoto Its Very slow Than This PHoto

 

From the picture you provided it looks like the Reserator 2 is placed on top of your computer case. The pump has to work extra hard to move the water slowing down the flow. Place the Reserator 2 on the floor at the same level as the the computer tower, make sure their are no kinks on the tubing and check if the water block on the video card does not constrict the flow of water.

Stock Zalman Reserators use weak Eheim 1000 fountain pumps to reduce noise levels so do not expect the flow meter to spin quickly. If the cooling tower is placed over .5 meters above the highest point of your loop the pump willl stall or not work at all.

 

the system and the case was in the same level

Now I don't use case I put All hardware on the table with the water system next them !!

Now When I Disconnect the tubes and empty the water I cant Run the system any more !!! the water Don't WANT to GO inside the tube Even When I made A Tube From IN TO OUT ( IN_OUT ) Only with out the VGA and CPU block !!

SO what I do I Even Tired TO put it Up Round 1m still same problem

What I do !!1 I'm A FCKING DUMB Man < WHY I GO WITH WATER COOLING

Guys I start Fell Very Mad i swear I DONT KNOW WHAT I DO MY SYTEM NOT RUN AT ALL IT JUST FROM 5 Hours Ago Brand New System WHY THIS happen To me

 

This Some Real Photos For Who Don't Believe me

This Case Still need modded It just To SHOW PEOPLE HERE Who Don't Believe me







X1950XTX




SO IM NOT LIEING OR SOME THING IM TALKING REAL I NEED ANSWER NOW NOT TOMORROW OR SO

 

This is a forum, not a chat room. People will reply when they get around to reading it. You cannot force a community responce.

 

man im in a trouble and i dont know what to do !!!!

 

The Reserator 2 cannot be filled from the intake tube due to the designers forgetting to put pressure release hole on top of the fill tube. First carefully check if the plastic flow tab on the pump is set property and then the pump itself.

On the top of the pump at the bottom of resevator their is a small gap where the water is sucked in. Look for a small gray plastic tab with a flashlight and it should be facing a small hole on the bottom that fills the tower with water from the computer.

Pictures: http://sg.vr-zone.com/?i=3851&s=5

If the tab is in a different direction the flow rate will drop. To fill the system you need to first reconnect all the tubing and take the lid off the tower. Carefully fill it with distilled water and keep the lid open.

If it is possible run the cooler with the computer off until all the air is out of the loop to avoid damaging your new computer. If all else fails check the pump to see if it works. It should make a quiet "burr" noise when submerged in water. Running the pump dry will wreck the in-propeller.

A silent pump with no vibrations needs to be replaced. If this is the case call Zalman or RMA the whole cooler for your money back.

 

THANKS Computer Gremlin ,, I thank you from My heart !!!

And CAn you tell me WHat YOu Was MEAN !!! They BLock Teh Water Tube Or some thing I must Open IT or What !!!!!!!!!! Becasue I dont Know Eaxalty What you mean

Btw : I think the pump was make '''' It should make a quiet "burr" noise ''''

But I dont Know Any thing About This FCKING SYSTEM IF I RETRUN IT I WILL GET MY MONEY SPEEDLY I DONT LIKE THIS SYSTEM ANY MORE

I give Advise TO People >

DON'T BUY THIS SYSTEM ,

It's Crappy system , Wake system , This not Worth The money

I tried it it failed with me and I have Wait to the next week end to get my money back and I think to get the new gigabyte water cooling system

NEVER BUY THIS THING IF YOU WANT BE HAPPY

this system Lost My Time + money I'm to buy it

But No Problem I will use the stock cooling for my hardware and WAIT My fcking money

ThanksSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS



Edit : Stock Cooling

6600 2.4 NO OVERCLOCK 40 C
1950XTX NO OVERCLOCK 70 C

THis WAs The Same Temps With the Zalman 2 It Was A CRappy System

BTW : I TRIED 3 NEW SYSTEM OF THOSE AND THEY ALL NOT WORK !!!! I DONT KNOW WHY BUT NOW I CANT DO ANY THING I LOST MY WHOLE DAY IN TEH ZALMAN SHOP FOR NOTHING !!!!!!!!!!!!!

 

If a significant amount air cannot be removed from a system it must equalize the water's vapor pressure to the ambient air pressure or else you have a pressure cooker as the water heats up. Normally a little gas eventually finds it's way out of water as it heats up and dissolved CO2 is released. A few bubbles are acceptable but it is impossible to bleed out about 1 or 2 cups of air from Reserators 1, 1 Plus and 2 water coolers.

On the outside online pictures show a hole in the Reserator 2 but when the lid was taken off the resevator a small white plug is visible from the inside in a couple reviews and never mentioned anywhere in the manual. Yet the manual it states their is internal air pressure and to tilt the tower 70 degrees to release it if air in the tubes prevents the flow of water during the first operation.

The Resevator 1 has a pressure release hole and no section of the manual deals with removal of internal air pressure. Shame on you Zalman for selling a defective product.

 

Thanks Again MAn

The Problem THis system SO Expensive Not cheap

When I tried A 4 of THem They have Same Problem there is no flow mean when the system just turn on there is a lit push on it then after 1 sec the water in tubes stop

so I give them back to check and tell me if they will give me working one or give me money back to get gigabyte

Thankssss FOr your help

Zalman Is crappy company Dont Buy This Thing

 

everytime you post, I can feel my grade in english dropping.

 

Im hoping he's not from the UK or we are in trouble :S.



Morgan.

 

He's from Dubai.

 

lol Thanks Guys

Sorry For The English

 

No problem with your English. We have a little bit more of an issue with TYPING EVERYHING IN CAPS, typing in big script and throwing in various colours when this is not really necessary.

Oh, and can you please stop circumventing the swear filter ("FCKING")? Thanks.

 

thanks and sorry man im just mad


but i say it again im so sorry

 

For Zalmans defence the Reserator is built to be a silent cooling system not a powerful cooling system.

Assuming that the ambient tempratures in Dubai are pretty high compared to the UK id be happy with 40C for my CPU considering.

 

yeah any ways thanks guys for help

Good luck To get my New one

 

Maybe take the lid off when you run it. I can imagin ethere is a vacuum in the tank and that the pump is defensless against it.

 

Ok What you Mean By lid Sir, Can You Tell Me

Thanks , Sir