New sponsor: Phenoptix Phenoptix have agreed to sponsor the project with red 3mm LEDs! Thank you very much for your contribution!
The package from Phenoptix has arrived! Phenoptix is sponsoring with 32 red 3mm LEDs that will be used to light up the feet and the back of the motherboard. Thank you very much for your contribution!
Looking forward to seeing them in the feet, I see the smoked gay is in the lead, wonder if the typo has anything to do with that!
The package from Lamptron has arrived! Lamptron is sponsoring withpower and reset switches, cables, FC6! Thank you very much for your contribution!
New sponsor: Komplett.no Komplett.no have decided to sponsor the project with Corsair H50, Silverstone SST-SOD01, Arctic Silver ArtiClean, Arctic Silver Alumina and Fractal Design EFS Fan Accessory! Thank you very much for your contribution!
Because the old feet came out a bit smal, i decided to make a set of new ones. This update wont be that interesting since you've seen this part before. This time I used a 57mm hole saw, which means that the diameter of the feet got about 1cm longer than last time.
The package from Komplett.no has arrived! Komplett.no is sponsoring withCorsair H50, Silverstone SST-SOD01, Arctic Silver ArtiClean, Arctic Silver Alumina and Fractal Design EFS Fan Accessory! Corsair H50: Arctic Silver ArtiClean: Arctic Silver Alumina: 4xFractal Design EFS Fan Accessory: Silverstone SST-SOD01: Thank you very much for your contribution!
I got wires, tips for det soldering iron, experiment card and 3mm LED-holders from Clas Ohlson yesterday, and I've done some work on the frontpanels. The guy I'm planning to order plexi from is om vacation, but I think you get the idea of what the feet will look like... The inner frontpanel... The outer frontpanel... I've cut the motherboard tray so it looks a bit better, and dont use to much of the space at the rear end of the case. And here's a test to show you how the LEDs will be mounted on the motherboard tray... I've also made a test on how the fan controller will be mounted on the front panel, and I hope to post som pictures of that soon. What do you think about the project som far?
A few weeks ago I got some new hardware, but unfortunately I've had a lot of things to do lately. But anyway, here's some pictures of my new motherboard, CPU and RAM-modules I've got a pair og WD Caviar Black 1TB 64MB as well, and pictures of does might come later. - CPU: AMD Phenom X6 1090T - RAM: Corsair Dominator GT 2x2GB 1600MHz - Motherboard: Asus Crosshair IV Formula
Sorry for taking so long, but here's a new update! Testing the LEDs for the feet: Mounting and testing of the LEDs on the motherboard tray. Unfortunately 2 of the diodes seems to me a bit defect, and on of them doesn't work at all Mouting hinges on the to sidedoors: Testing the holes i made for the locks: Milled/Routered an edge so the motherboard tray will be mounted tighter: 76mm-hole for the rear 80mm fan: The content of the package from performance-pcs.com. Unfortunately I got a 3mm thick panel of acryl instead for 5mm thick as I ordered. Therefor I ended up buying 6mm thick clear plexi for Clas Ohlson. Hope you like the update, and I promise to post a new one soon!
Yes, I think I'll be able to take some pictures of that, but it might take a few weeks Thanks! I'll upload another update during the day, and then you'll se more pictures of the feet! Thanks!
