Discussion in 'Project Logs' started by Razor_cut, 6 Nov 2005.
Sandpaper: 800, 1200, 2000. (start with the 800. But even better
is to sweep the whole area with 200grid or so at first. the the
following rout. But be shure to move back and forth, back and forth etc.)
Yes I haven't polished the acrylic, but will do later.
Thanks for the remider thou.
Thanks for the positive feedback!
That looks really really good... are you going to treat the finished surface though? Autosol is great for making things shine but that will go tarnished and rusty if you don't at least put some wax on it (similar to when you polish your car)
Will spray it with Protection clear lacquer, clear
spray witch will hold the clear surface I hope..
I grinded the sides of the acrylic plates.
But theres nothing called perfect here..
Plain and shiny.
How it looked erlier. Some difference..
I think you should put the acryllic plates on the outside. Would look better IMO
Imo, the acrylic plates look great where they are now, only, they should be lit up.
I have to agree with fredz too, this way it's nice and understated.
Looking really good, those edges came up a treat!
yeah just mount a few LEDs in the bottom of the acrylic, it'll look amazing if you hide the wiring well
You just laid the planing open for the webb.
But we will see when theres time to continue.
But there will be four LEDs on the plate with
9 holes and possibly two on the other side...
The surface on the metall has been sprayed with "anti rust" or something. It looks more like glas now
Not so well pollished but this side will not be seen in the case.
Nice, after some more sanding and polishing it looks much better!
May i ask is this really needed?
I don't particularily like the HSF unit but the idea is nice. The execution...could use some work.
It will be used untill the GPU block arives...
Since the work was made mostly on the fact of outlook, estetics etc. I didn't think of air pressure.
The blue dots are nipples from the radiator (PA120.2).
Soon another update.
eVGA 680i :: eVGA 8800GTS :: PC-V1100B :: Mushkin XP2-5300
The orginal modification, Miranda, is short out of work. I mean time this is the comp I setled for.
Love this nVIDIA cooler, togehter with the RAM it's nice.
The motherboard is compleatly in my taste, simple and clean.
You will have problems with that mobo, just so you know...I'll post a link later.
Damn sexy hardware
Nice to see that your still alive n' kickin =D
And yes, damn sessy hardware..
lol is this thread still alivee
btw i love that board evga is sickk plus them mushkin ram amazing
ccan u post pics overall of the board not zoomed in i wanan buy that ram and board buy i wanna see if that green pcb ram is taking away from the 'black' look of the board
Project dead ? hmm or still alive ?
Separate names with a comma.